Gasoline generator HECTH GG 950 Sanpreis

6 300

4 500

uah / PCS.

Gasoline generator HECHT GG 950 is a small, lightweight and stable electric voltage generator with an ideal price-quality ratio. It is equipped with a two-stroke HECHT engine with a displacement of 63 cm³ and a power of 2 hp. The generator is equipped with an electrical panel with a classic 230 V/50 Hz socket for connecting devices with a maximum continuous power consumption of 650 W; it can be loaded up to 720 W for a short time, for example, with the starting currents of some equipment. However, it is not equipped with charge regulation, so you need to constantly check the battery charge level and turn it off in time. Both outlets are protected from overload by a circuit breaker.

The generator is equipped with rubber feet that limit vibration and a frame with handles for easy portability.

2-stroke single cylinder air cooled engine
1x socket 230V – 16A Noise level 95 dB
Fuel tank volume, 4.2 l
The maximum operating time at full load is max: 5.8 hours.
Average fuel consumption: at 50% load - 0.54 l/h / at 100% load - 0.94 l/h.
Recoil starter

The generator has a 4.2 liter fuel tank; a full tank lasts approximately 5.8 hours, but consumption may vary depending on the load on the power plant.

The dimensions of the central block are 41 x 35 x 35 cm, its weight is only 16.5 kg. These features and a noise level of 95 dB make it very popular among summer residents, summer residents, caravan and boat owners.

The output voltage characteristics of the generator differ from those of a conventional electrical network. The output voltage may fluctuate depending on the load. To power more sensitive devices, we recommend purchasing an electrical control unit with AVR control or an inverter control unit. Therefore, it is advisable to consult with their manufacturer or seller about the possibility of powering particularly sensitive electronic devices using this power unit.

Some electrical devices may draw several times the normal operating current for a short time when starting, and for appliances such as electric motors and other devices using induction, it may draw more than three times the normal power draw for a short time. As a guideline for the calculation, you can use the so-called starting coefficient, by which you need to multiply the normal power consumption of the connected device. Then, for example, multiply appliances such as a hair dryer, hot air gun, deep fryer, mixer, oven, iron, toaster, vacuum cleaner, table lamp by factor 1. Factor 2 is usually applied to electric mowers, angle grinders, hedge trimmers, power saws, washing machines, etc. etc. For compressors, high-pressure washers, concrete mixers, a factor of 3 is usually used, for refrigerators, freezers or air conditioners this factor may even exceed the value of 3. In practice, one can roughly calculate what an appliance with a power consumption of 600 W and a factor of 2 requires from the central unit maximum power of at least 1200 W.