Product code: 100005215
Acrylic primer Izoplast E Nano Power ( 5 l ) ADW
Izoplast E Nano Power is a hydrophobic deep penetration primer based on acrylic dispersion.
It is used for dedusting and strengthening the top layer of the bases before applying another material.
Application:
- concrete surfaces
- cellular concrete walls
- cement and gypsum plasters
- plasterboard and wooden (fiberboard, chipboard, etc.) surfaces
Advantages:
- penetrates deeply into the surface
- reduces water absorption of bases
- reduces the consumption of the finishing coating (paint, waterproofing, etc.)
- it can be used on dry and wet bases
- it can be applied both manually and by spray
- non-toxic, can be used both outside and inside structures
Izoplast E Nano Power is a hydrophobic deep penetration primer based on acrylic dispersion. It is used for dedusting and strengthening the top layer of the bases before applying another material.
Instructions for use:
The surface must be solid, free of dust, dirt and other anti-adhesive substances.
If necessary, repair the surface with appropriate materials.
Mix before use. Apply to the surface with a brush or roller. It is recommended to apply several layers on porous surfaces. Apply each subsequent layer of primer without waiting for the previous one to dry completely.
When priming the bases before applying acrylic paints and / or emulsions, dilute the Izoplast E Nano Power solution with water in a ratio of 1:1.
Application Notes / Restrictions:
Observe the safety and health regulations during the work.
Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.
Composition: Water-based acrylic emulsion.
Color: White
Packing: 5 L Canister
Drying time: ≤ 1 h
Consumption: 0.2 – 0.25 kg/m2
Application temperature: 5 - 30 C
Shelf life: 12 months in the closed original packaging at a temperature above 5 C.
Other products in the category
Useful articles
