
Product code: 100005212
Manufacture`s article: 0000o4021
Bitumen-rubber mastic Dysperbent water-based, 20 kg ADW
Izoplast Dysperbent is a water–based bitumen-rubber mastic modified with synthetic rubber.
Scope of application:
- Roof repair and maintenance
- Waterproofing of foundations
- For waterproofing residential and public buildings
- Priming of mineral bases for proper insulation
- Seamless waterproofing of vertical and horizontal surfaces
Advantages:
- Water-soluble, without organic solvents
- Resistant to weak acids and salts
- For external and internal use
- Ready for use, odorless
- Very high adhesion to the substrate
- It has thixotropic properties
- Does not react with EPS and XPS polystyrene, can be used together with materials that are not resistant to organic solvents and their vapors
- Easy to apply with a paintbrush, brush or spray method
Instructions for use:
Mix before use.The surface should be smooth, free of dust and dirt. Concrete, gypsum, ceramic, etc. surfaces should be primed with a solution of DYSPERBENT diluted with water in a ratio of 1:1. Do not store the diluted solution. To protect the waterproofing coating from mechanical damage in the underground parts of the building, use "Dysperbent" using a spiked membrane. Mix before use. Apply the mass with a roofing brush, brush or spatula at temperatures from 5 ° C to 25 ° C and in wet weather. The drying time of one coating layer at a temperature of 20 ° C is 6 hours. Depending on the need to apply the material in 2-3 layers. Apply each subsequent layer after the previous one has dried. It can be used on a slightly damp surface, then the drying time of the coating increases. The coating becomes waterproof only after complete curing.
Application Notes / Restrictions:Observe the safety and health regulations during the work.
Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.
Composition - Water-based bitumen-rubber emulsion
Color - Black
Packing - 20 kg bucket
The remainder of the dry mass is 45 %
Drying time - 6 hours
The interval between applying layers is 3 hours
Consumption (waterproofing) - 0.6-1 kg/m2
Water resistance - after 6 hours
Application temperature - from 5 °C to 25 °C
How to apply Dysperbent bituminous rubber mastic?
Apply the mass with a roofing brush, brush or spatula. Apply at a temperature of 5 to 25 ° C and in wet weather. The drying time of one coating layer at a temperature of 20 ° C is 6 hours. Apply the material in 2-3 layers. Apply each subsequent layer after the previous one has dried. It can be used on a slightly damp surface, then the drying time of the coating increases. The coating becomes waterproof only after complete curing.
Other products in the category


Решил попробовать эту мастику для фундамента. Расход действительно маленький, а результат порадовал. Фундамент теперь надежно защищен от влаги. Доволен покупкой!
После нанесения dysperbent мастики крыша стала надежной защитой от дождей. Не сталкивался с протечками с тех пор. Просто и эффективно.
Dysperbent - находка для меня. Уже несколько месяцев крыша в отличном состоянии. Воды не пропускает, а это главное. Доволен покупкой.