Product code: 100005219
Manufacturer's article: 0000o5766
Polymer-cement waterproofing Teknomer 200 Crystallized deep penetrating, 25kg + 2l TEKNO
Waterproofing and protective solution for concrete Teknomer 200 Crystallized, consisting of a liquid component based on an emulsion polymer and a powder component based on cement containing chemical additives that increase water resistance and workability, and can be used at negative and positive water pressure.
Where it is used:
- Indoor and outdoor
- For vertical and horizontal surfaces
- In rooms with high humidity, such as bathrooms, showers, toilets
- In water tanks, swimming pools
- When waterproofing the foundation
- In tunnels, elevator pits
- It is applied to surfaces such as concrete, plaster, screed
Features and Benefits:
- Resistance to negative and positive water pressure
- It has a high retention capacity
- Does not cause corrosion of fittings or steel
- It can be applied to horizontal and vertical surfaces
- Prevents carbonation of concrete
- Resistant to freezing-thawing
- Easy to apply with a brush, roller or spray
Instructions for use:
The application surface must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. If there are areas in the form of cracks, cavities on the surface - they should be repaired using cement mixtures Teknorep 300 and Teknorep 300 EX. If there is an active water leak, it must be eliminated using Teknoplug.
Before applying, the surface must be moistened. The liquid component should be placed in a clean container, add water, observing the mixing proportions, slowly add the powder mixture and mix thoroughly with a low-speed mixer (500 rpm) for 5 minutes. Soak the solution for 3 minutes and continue mixing until a homogeneous mass is formed.
The prepared solution should be applied to the surface in 2 or 3 layers with a roller or brush. The direction of application in each layer should be perpendicular to the previous one. The time interval between applying layers is at least 3 hours. The total thickness of the application of 3 mm will be enough. Corners and joints on the application surface must be sealed with elastic insulating tape for sealing Teknomer Pah Band 120/70 construction joints. After application, the surface must be protected from direct sunlight, frost and wind for at least 1 day.
|
Composition of the material |
Component A: grey powder Component B: white liquid |
|
Packaging |
25 kg (A) +2 l (B) |
|
Expiration date |
12 months in a dry environment in a closed package |
|
Application temperature |
+5°С...+35°С |
|
Pot life time of the mixture |
2 hours |
|
Expenditure |
2-2.5 kg/m2 |
|
Operational readiness |
7 days |
|
Adhesion strength |
1.00 N/mm2 |
|
Waterproofing |
7 Bar (positive) 4 Bar (negative) |
Additional products
Other products in the category
Useful articles
