Acrylic cord 10x20 mm for waterproofing and sealing working joints, 10 r.m. Arfen

2 148

uah / roll.

Acrylic cord "Hydroflex" 10x20 mm securely and firmly adheres to the concrete surface, filling seams, abutment and the slightest voids in the concrete body, forming a reliable protective layer. The principle of operation is that as a result of hydration, the bentonite cord increases in volume, forming a gel-like mass that fills all cracks and voids and reliably seals the seams of the concrete structure. The cord expands 3 times in the concrete body.

concreting interruption seams: cold, working seam
inputs of engineering communications

When interacting with water, bentonite bundles uniformly increase in volume by more than 3 times, providing reliable bentonite waterproofing without losing structural strength. Due to its composition, the harness retains flexibility even at low temperatures (up to -15 ° C). Bentonite bundles are resistant to chemical compounds, such as, for example, freshly laid concrete.

Sold in bays of 10 m.p.

HYDROFLEX cord 10x20 mm based on acrylic, swells when in contact with water and increases its size. In a confined space, it creates a stress that reduces water permeability, even in the presence of cracks and porous places in concrete. Due to this, it is an ideal material for reliable waterproofing of concrete structures. Excellent technological performance and an easy installation method make it possible to use the product as an insulating material for joints in underground construction, hydraulic structures and civil engineering.

Application:Swimming pools

Water tanks
Sewage treatment plants
Structural seams of buildings
Joints of the wall with the foundation of the building
Sealing of communication passages through foundation walls
On PVC pipes used as a water-repellent flange
It is used to seal areas exposed to seawater

Features and Benefits:Easy installation

Universal application
Swelling occurs in a controlled state. Does not damage concrete when swollen
Resistant to salt water and various chemicals

Limitations:After installation, the surface must be protected from moisture before pouring concrete

Do not use for expansion joints
Do not mount at elevated water levels

Sold in bays of 10 m \ pog.

Composition : Acrylic - based polymer
Color : Blue, Red
Water pressure : 50 mvs (5 atm)
Swelling : 300% (free expansion in water)
Water transmission : Does not miss
Application temperature: -30 °C to 50 °C

How to mount a cord made of HYDROFLEX hydrophilic rubber?

Unwind the required amount of cord. Apply glue in the middle of the seam and secure the cord to the surface. It is necessary to connect the cord joint-to-joint, without overlap. Do not use for expansion joints.

How to prepare the surface for mounting?

The surface must be clean and dry. It is forbidden to install on a wet, ice-covered or dirty surface. Also, installation cannot be carried out during the rain.

Unfortunately there are no reviews yet. But you can fix it!