Product code: 1000000492
Manufacturer's article: 0000m2
Waterproofing tape Hydroflex 121/70 mm for joints 120/70 mm on a textile basis, 50 lm. Arfen
HYDROFLEX 120/70 mm waterproofing tape is an elastic material based on thermoplastic elastomer (TEP). The membrane is designed for waterproofing expansion joints and cracks in buildings, as well as for waterproofing basements, underground structures, tunnels, vents, hydraulic structures and swimming pools.A specially developed formula allows for high adhesion to both dry and wet concrete surfaces. The HYDROFLEX membrane is resistant to the effects of the root system of plants and aggressive substances of the chemical industry (fuel oil and technical oils). HYDROFLEX membrane is available with perforation at the edges of the membrane, 120/70 mm wide
Advantages:
- the system is resistant to positive and negative pressure
- possibility of laying on wet surfaces
- high chemical resistance
- wear resistance
- does not require additional mechanical fastening at the edges
- operating ambient temperature from -40From up to 90C
- compatible with bitumen
- resistance to UV radiation (used on high-rise construction sites)
Hydroflex 120/70 mm thermoplastic tape with high elasticity is used for sealing expansion joints and cracks. The assortment includes perforated and non-perforated tape, 120/70 mm wide.
Scope of application:
- Horizontal and vertical seams.
- Underground structures, basements and semi-basements, blind spots.
- Hydraulic structures designed for wastewater treatment, reservoirs for drinking and household water and swimming pools.
- Tunnels and ventilation openings.
- For waterproofing cold joints.
Main advantages:
- Easy to apply with epoxy glue.
- The uniqueness of the chemical composition ensures high elasticity (600%).
- High adhesion to dry and wet concrete.
- It is not damaged by plant roots.
- Resistance to aggressive effects of ozone, fuel oil and oil.
- Adaptation to use in a wide temperature range.
- The possibility of connecting two bands by means of thermal exposure.
Chemical composition : TEP (thermoplastics)
Colour : Light grey
Shore hardness : A 80
Operating temperature : -40/ 90
Heater temperature : 270 C
Elongation to failure : 600%
Tensile strength : N/cm >600 N/cm
Resistance to hydraulic pressure bar : >8 bar
Tensile strength : MPa >6 MPa
UV resistance : 7500 h
Bitumen resistance : Good
Resistance to sulfuric acid : Good
Alcohol resistance : Good
Detergent resistance : Good