How to glue pool tiles
Tiling is a successful and durable solution for indoor and outdoor pools only if the tiles have been firmly glued. In order to achieve the maximum quality result, it is necessary to use a special adhesive mixture designed for fixing tiles in the conditions of operated pools.
Such a special mixture is reinforced Teknofay Flex adhesive with an extended life of the finished mixture. Due to the increased strength of adhesion to the surface, this adhesive works perfectly on vertical and horizontal surfaces indoors and outdoors.
In order to glue the tiles in the pool, it is enough to prepare and use an adhesive mixture in accordance with the instructions from the manufacturer. Having combined the dry adhesive composition in the proportion of 6-7 liters of water per 25 kg of the mixture, the glue must be mixed for 5 minutes, then leave the composition for 10-15 minutes and after this time mix again for about 2 minutes until a homogeneous glue is obtained. The resulting glue has a life span of 6 hours. this allows you to glue tiles to the pool surfaces as accurately, efficiently and accurately as possible.
After complete solidification, the Teknofay Flex tile and stone adhesive provides maximum bonding strength of ceramic tiles to the concrete surface, having high performance characteristics and resistance to:
high and low temperatures- high humidity and complete drying of the surface
- weather and climatic changes in the external environment
- water pressure
- mechanical influences
- regular antibacterial surface treatments
Once you choose the right glue to glue the tiles in the pool, you can forget about the repair and restoration of the pool for a long time. And by choosing a reinforced adhesive for tiles and stone Teknofay Flex, you can be sure of the strength and durability of the cladding coating for many years.
