How to round rebar using a bending machine
How to round the rebar using a bending machine? You will need special equipment, such as bending machines or tools for making radius bends.
Here is a step-by-step instruction for rounding rebar using a bending machine:
Prepare the rebar: Measure and mark the place where the rounding is required. Clean the ends of the reinforcing bars from rust and dirt.- Install the rebar into the bending machine: Put the reinforcing steel into the bending machine so that the place you want to round is in the right position between the bending rollers or other special tools.
- Complete the rounding: Turn on the bending machine and follow the operating instructions to create the required radius. Bending rollers or other tools will put pressure on the rebar, gradually bending it into the desired shape. Adjust the pressure level and valve movement speed according to the project requirements.
- Check the rounding: After completing the rounding, carefully check whether the fittings meet the requirements of the project. Make sure that the radius of the rounding corresponds to the specified parameters.
- Repeat the process if necessary: Repeat these steps for each reinforcement part that requires rounding.
Rounding of reinforcement using a bending machine can be useful when creating armature frames, reinforcement frames for reinforced concrete structures and other building elements where bends or radius shapes are needed. It is important to observe all safety measures when working with a bending machine and contact professionals if you do not have sufficient experience in this field.
Additional products
Manual rebar bending machine Afacan 10E, up to 10 mm in diameter, for non-working rebar
1 500
uah / PCS.
Sale
Manual rebar bending machine Afacan 12E, up to 12 mm in diameter, for sharp corners
2 100
uah / PCS.
Manual rebar bending machine Afacan 12EB, up to 12 mm in diameter, for non-working rebar
1 260
uah / PCS.
Manual rebar bending machine Afacan 12PT, diameter up to 12 mm, reinforced with stop for working rebar
2 150
uah / PCS.
Manual rebar bending machine Afacan 4B, up to 14 mm in diameter, for working rebar
4 000
uah / PCS.
Sale
Manual rebar bending machine Afacan 14EC, up to 14 mm in diameter, for working rebar
2 200
uah / PCS.
Manual rebar bending machine Afacan 16PT, diameter up to 16 mm, reinforced with stop, for working rebar
3 000
uah / PCS.
Sale
Manual rebar cutting machine Afacan 18M, up to 18 mm in diameter, with removable handles
6 900
uah / PCS.
Manual rebar cutting machine Afacan 22M, up to 22 mm in diameter, with removable handles
6 500
uah / PCS.
Sale
Afacan 26MX reinforced manual rebar cutting machine, up to 26 mm in diameter, with removable handles
10 200
uah / PCS.
Sale
Manual rebar cutting machine Afacan 32M, up to 32 mm in diameter, with removable handles
20 022
uah / PCS.
Manual machine profile Afacan 16KD for bending reinforcement with a diameter of up to 16 mm
1 980
uah / m²
Manual machine for bending reinforcement Afacan 10E, diameter up to 10 mm, MARKOUT
1 450
1 650
uah / PCS.
Manual rebar cutting machine Afacan 28M, up to 28 mm in diameter, with removable handles
10 190
uah / PCS.
Afacan HS26 portable hydraulic rebar cutting machine, up to 26 mm in diameter, 220V
114 885
uah / PCS.
Manual bending machine for fittings Afacan 4B, with a diameter of up to 14 mm, for working fittings - MARKOUT
3 000
uah / PCS.
Markdown
Копия Manual rebar bending machine Afacan 10E, up to 10 mm in diameter, for non-working rebar
1 150
1 368
uah / PCS.
Markdown
Manual machine for bending reinforcement Afacan 10EB, diameter up to 10 mm - DISCOUNT
700
810
uah / PCS.
Markdown
