Ideal primer for self-leveling floors - Teknobond 300

For many years now, self-leveling flooring has been quite popular in industrial workshops and not only.
It is very important to choose high-quality materials for filling the self-leveling floor, good workers who will faithfully carry out repair work, as well as properly prepare the base. After all, a properly prepared foundation is already half the key to success. Do you agree?

Well, what can't we do without when preparing the foundation? – That's right! Without a suitable primer. 

We would like to draw your attention to a novelty in the range of primers from the manufacturer Tekno – Teknobond 300. It is a multifunctional, low-viscosity, water-based penetrating epoxy primer. Thanks to it, your self-leveling floor will last for many, many years (of course, if the self-leveling floor is of the same excellent quality as the Teknobond 300 primer).

Teknobond 300 primer is a two-component primer, therefore, before application, mix the two components with a low-speed mixer and calculate the time so that the master can apply all the prepared material to the surface in 30 minutes, since this is the maximum lifetime of the finished working solution.
 

 

The manufacturer recommends using the primer at an air temperature from 10 °C to 30 °C. Otherwise, using the material in weather conditions below 10 °C, the primer may take a long time to dry.

You can get acquainted with the technical specifications of the Teknobond 300 by clicking on the link.

Or call us and our experts will advise you.

0800 307 050 (calls are free)