Online shop "Budleya"
Useful articles
Pouring and repairing concrete
Manual cutting machine for rebar up to 22 mm in diameter

News

Manual cutting machine for rebar up to 22 mm in diameter

A cutting machine is a tool that is used for precise and efficient cutting of metal fittings. This type of machine is usually used on construction sites, in metallurgical and construction works. Here's how it works:

1. Preparation of the machine: First, the machine must be installed on a stable surface or attached to a special working platform. This is important to ensure the safety and accuracy of cutting.

2. Armature preparation: The armature to be cut must be measured and marked at the appropriate length. This is usually done with a tape measure and a label.

3. Armature clamp: The armature is placed in a special clamp that locks it in the desired position. The clamp usually has adjustable clamping plates to ensure a secure attachment.

4. Parameter adjustment: The machine operator can adjust the cutting parameters, such as the length and angle of the cut, depending on the requirements of the project.

5. Cutting: After preparing the machine and fittings, the operator presses a lever or uses another mechanism to activate the cutting tool. Usually it is a circular saw with carbide teeth that moves along the armature, producing a cut.

6. Cutting completion: After the cutting is completed, the operator turns off the machine and removes the cut fittings.

7. Quality Control: It is important to check that the cut ends of the reinforcement meet the required specifications for length and cutting angle.

Manual rebar cutting machines provide precision and cutting speed, which makes them essential tools in the construction and metallurgical industries. However, operators must observe safety measures when working with these machines, as they can be dangerous if used incorrectly.