Online shop "Budleya"
Useful articles
Pouring and repairing concrete
Manual cutting machine for rebar up to 26 mm in diameter

News

Manual cutting machine for rebar up to 26 mm in diameter

A manual rebar cutting machine with a diameter of up to 26 mm is usually used on construction sites where it is necessary to quickly and accurately cut metal rebar, which is used for reinforcing concrete structures. These machines allow operators to cut reinforcing bars of different lengths with minimal effort.

Here's how they work:

The operator sets the manual machine on a convenient work surface and secures it for stability.
The operator places a reinforcing bar (up to 26 mm in diameter) on the working plane of the machine.
Size adjustment: The operator sets the required length of the reinforcing bar to be cut using a special mechanism on the machine. This mechanism can be in the form of a handle or a button with which you can adjust the length of the cut.
After the size is set, the operator activates the cutting mechanism. This is usually done by pressing the handle or button. The cutting mechanism compresses the reinforcing rod and scrolls it through the cutting element, which cuts the rod to a set length.
Extraction of the finished segment: After cutting the reinforcing bar, the operator extracts the finished segment and puts it in the destination.
Repeating the process: The operator repeats the process for each reinforcing bar that needs to be cut.

Manual rebar cutting machines provide high precision and cutting speed, which makes them an important tool on construction sites where it is necessary to process large volumes of rebar rods for construction work.