Installation of wall drains
With each goth, technologies are developing faster and this applies not only to the field of technology and IT technologies, but also to construction. Designers' requests are growing at the speed of light. After all, every customer wants the most stylish and ergonomic solution. Therefore, every year manufacturers present new products in their ranges, every few years really innovative solutions are produced. Radically different and modern, which revolutionize the world of design.
One of such solutions was the wall–type shower channels. Yes, yes, now take a shower, you won't see a drain under your feet. Such a solution will visually expand the space, because the drain is located in the wall, which makes it almost invisible. This solution is gaining popularity every day in many countries of the world, even though it came to us just recently.
In this article we will talk about the features of the installation of such products. The first thing to start the installation is to determine the installation location of the shower tray, as well as its length. After that, the pipes are separated to the place where the tray is connected. Since the shower tray is mounted in the wall, it is also necessary to hide the main part of its elements there so that only the grille remains visible.
!!! Since the installation is wall-mounted, the slope of the floor is done only in one direction.
The installation will be carried out in several stages:
- To do this, you need to make a recess in the wall. We offer a wall tray of the Wall Line series, the dimensions of the housing VhDhG – 14x30x6 cm. Accordingly, for its installation, you need to make a recess in the wall to fit the size of the case.
- A waterproofing membrane (included) is glued around the housing to protect against leaks.
- After that, using the mounting legs, the height of the product is adjusted to the level you need.
- The housing with a siphon is connected to the sewer. For unhindered connection of the siphon, we offer 360-degree rotary models.
- Next, the frame and the mounting corners of the frame are installed to the body.
- A shutter and a mesh are installed inside to collect hair and small debris.
- It remains to install the grid. We offer two variants of the grid 60 or 100 cm. The length of the grid can also be adjusted by trimming in special places. In this case, the final length should not be less than the length of the body.
- After pruning (if necessary), plugs are put on the grate on the sides.
Next, to clean the system from the hair, you will need to remove the grilles with a special hook (included), get a garbage collection net and clean it.
Also, another additional advantage of this model will be a high throughput – 42 liters / minute. This means that with the correct slope of the floor and installation of the product, your feet will never stand in water, even with the most powerful shower head.
To summarize, if you are looking for a modern, high-quality and reliable solution for arranging a drain in the shower, pay attention to the wall mounting channels. Yes, their cost is slightly higher than conventional shower trays, but also a completely different level of design, installation and quality.
