News

How many ml in one click on the soap dispenser?

In the world of household chemicals and hygiene products, every drop counts. Understanding the correct dosage of the product allows not only to save money, but also to ensure maximum efficiency of use. In this article, we will look at how many milliliters are contained in one click on the pump dispenser for soap.

Pump dispensers have become popular among manufacturers of detergents and shower gel due to their convenience and accuracy. They allow consumers to get the right amount of product without excess and overpayment. For people who appreciate the effective use of mila, a pump dispenser is a real salvation.

Dosage Range: 0.05 - 0.3 milliliters

An important aspect of using a pump dispenser for mila is knowing the dosing range. According to the manufacturers, each press on the dispenser gives out from 0.05 to 0.3 milliliters of product. This is a range that provides maximum flexibility and allows users to precisely adjust the amount of mila they need.

With this dispenser, you will be able to control the consumption of mila, avoiding its excessive use. By pressing the dispenser once, you will receive a minimum amount of mila, sufficient to ensure cleanliness and hygiene. If you need more product, just tap a few times and you will get exactly the dose you need.

Pump dispensers are also ideal for use in environments with high hygienic requirements, such as medical institutions, cafes and restaurants, where cleanliness is of paramount importance. Their convenience and precise dosage make them indispensable tools for maintaining hygiene in any conditions.

For those who appreciate accuracy and economy when using mila, a pump dispenser is an excellent solution. With a dosing range from 0.05 to 0.3 milliliters in one click, you can always get the right amount of product without excess. This is convenience and savings in one bottle. Do not miss the opportunity to make your life easier and improve the hygiene of your hands with the help of a pump dispenser for soap.

To ensure effective and safe cleaning and flushing of the elbow dispenser in case of blockages in the dosing system, it is recommended to follow these detailed instructions:

1. Prepare hot water: Before starting the procedure, make sure that you have access to hot water with a temperature of 60-70 ° C. This is necessary so that hot water can effectively dissolve and remove blockages from the dispenser.

2. Prepare an empty bottle: Carefully remove the empty bottle from the elbow dispenser and make sure that it is completely empty and ready for use during the rinsing process.

3. Fill the bottle with hot water: Fill the bottle with hot water using the previously prepared container with hot water. Make sure that the bottle is filled with enough hot water.

4. Install the bottle in the dispenser: Inspect the dispenser and insert the bottle filled with hot water back into its special compartment. Secure the bottle in the dispenser as it is usually done.

5. Pump the system: To start the flushing process, repeatedly press the dispenser lever. This will allow hot water to pass through the dosing system and dissolve and remove blockages.

6. Continue flushing: Keep pressing the dispenser lever and pumping hot water through the system until the system returns to normal operation. It is important to continue this action until the blockages are completely eliminated and the normal operation of the dispenser is restored.

7. Remove the bottle: After successfully rinsing and restoring the dispenser, carefully remove the hot water bottle from the dispenser.

Following these steps will help you to effectively flush the elbow dispenser and eliminate possible blockages, restoring its normal functionality. Remember that compliance with hygienic standards and safety rules is important when servicing the dispenser, especially in areas where cleanliness and hygiene play a key role.