What is a PPE sealing harness

The pinched jgut zi spinenogo polietilenu – tse granules polietilenu, scho spinyuyut vuglevodnem pid visokim vise z vikoristannyam spinyuyuchih rechovin method extrusion. The pre-form of the formula of the jguti cilindrichnoi formi riznih diametri vid 6 mm to 60 mm. In order to cool down that half-measure the jgut zberiga, I will set the form that is ready to vikoristannya at the constructs for the priznachennyam. Jgut iz spinenogo polietilenu vikoristovuetsya for gidroizolatsii, sealing that insulation shviv, yak poshilnyuvach at the lower constructions, for zapovnennya shviv, stikiv, that yak pakuvalny material.

DE ZASTOSOVUYUT JGUT PPE?heat- ta gidroizolatsiya stikiv panels at budivnitsvi budivel ta sporud

• heat- that gidroizolatsiya pidzemnih komunikatsiy
• izolyatsia ta poshilnennya dvernih ta vikonnih otvoriv, shchilin ta trishchin
• for laying seams when installing doors taikon
• sound insulation stin ta perekrittiv
• poshilnyuvach pid hour vstanovlenya pobutovikh konditioneriv
• poshilnyuvalny material for pakuvannya
• material for mebliv

YAK CORRECTLY VIBRATI JGUT PPE?jgut PPE diameter vid 6 to 15 mm — zastosovut for zapovnennya deformatiynih seams I at vlashtuvannii promislovih pidlog, seams at budinki zi zrubu.

• jgut PPE with a diameter of 12-20 mm — to be fixed for sealing stickers when installing windows, doors.
• jgut PPE with a diameter of 20-60 mm — to be fixed for the zapovnennya mizhpanelnih seams at budivnitsvi budinkiv.YAKI OSNOVNI PEREVAGI JGUTA PPE?

gnuchkist

• springiness
• zahist vid condensate
• znizhennya teplovtrat
• sumisnist z inshimi budivelnimi materialami
• dovgovichnost
• smallness and lightness
• zmenshennya noise
• elasticity
• chemical neutrality
• not abrasive
• don 't slacken the surface virobiv
• simple at vikoristanni

Jgut PPE pislya stisnennya shvidko vydnovlyu cob form navit pislya dovgogo period of the hour. The main characteristic of the jgut is that it is healthy until it is renewed, the chemical is neutral, the heat is strong.  The elasticity of the spiked polyethylene can be removed at low temperatures and does not last for an hour.

Polipropylenovy cord does not let water through that pair, that's why the system has a system of insulation seams. At the same time, the heat insulation is applied to the panel stickers abo trishchin at the walls, when the doors are installed, the window frames, the cord is inserted at the seam, after squeezing by 25-30%, the sealant, rozchin, plaster, and bitumen mastic are deposited, the seam is intended for the same izolacii.