Roof waterproofing
Waterproofing of the roof is a mandatory stage of construction, without which it is impossible to imagine further operation of the task. Special materials protect structures from the penetration of atmospheric precipitation through the roof in order to avoid their further destruction.
Why do I need waterproofing of the roof?There are a number of important tasks that the waterproofing of the roof performs:
Maintaining a comfortable microclimate in the under-roof rooms;- Protection of the under-roof space from moisture. Precipitation can penetrate into the building through cracks and joints of the roofing in case of poor-quality installation or damage. Waterproofing helps to retain moisture, which is very important for the safe operation of the building;
- Extending the service life of the entire roof;
- Protection of the insulated roof. Most insulation materials lose their original thermal insulation properties when wet. A protective waterproofing layer protects the thermal insulation from moisture, which preserves its functionality and prolongs its service life;
- Insulation of the roof from condensation, which can accumulate from the inside of the roofing.
Requirements for roof waterproofingThe materials used for waterproofing roofs must comply with a number of important parameters, among which the most important are:
Water resistance. The main property to which waterproofing materials should correspond by default. It is extremely important that the material can maintain a high degree of resistance to moisture even with prolonged exposure. For example, if a certain section of the roofing is damaged, precipitation can accumulate on the waterproofing layer and remain there for a long time. Waterproofing is obliged to withstand such an impact and not absorb moisture.
- Endurance. High-quality materials for waterproofing have high tensile strength. This characteristic is extremely important, since the roof is often subjected to strong wind and atmospheric load.
- Elasticity. Elastic materials withstand temperature changes much better, and are also not damaged by water pressure.
Teknomer 600 1K UV waterproofing fully meets all these requirements, which also does not need additional protection.
Teknomer 600 1K UV is the best solution for protecting the roof from moistureTeknomer 600 1K UV waterproofing is a liquid one-component polyurethane mixture that is applied to the treated surface using a spray gun, roller or brush.
In addition to its waterproofing properties, Teknomer 600 1K UV helps protect concrete from carbonation. The material is highly reliable, does not crack under the influence of high and low temperatures. In addition, it does not need to be protected in any way. All this makes Teknomer 600 1K UV an excellent choice for solving the problem of waterproofing the roof of structures for any purpose.
