Is it possible to do waterproofing without a topcoat?
Waterproofing is one of the most important stages of modern construction. It is the protective waterproofing layer that prevents the negative effects of groundwater and precipitation, which gradually destroy the building. Special liquid waterproofing mixtures allow you to protect the foundation, roof, open outbuildings (balconies, terraces, verandas) and even drains from moisture penetration. However, in most cases, the waterproofing itself also needs additional protection.
Why do I need waterproofing protection?
In addition to moisture, buildings are also exposed to other atmospheric phenomena. The greatest harm is caused by ultraviolet rays, which have a destructive effect on polymers in the waterproofing. Also, the waterproofing layer can be subjected to constant temperature changes, which causes its performance properties to deteriorate over time and shorten its service life.
In order to avoid destruction and rapid wear of the waterproofing layer, additional protective materials are used. They are applied on top of the waterproofing immediately after solidification, which is especially important for outdoor work under the sun. Of course, these are additional material and labor costs, but the result is worth it. But is there an easier way to solve this problem?
The advantages of using weather-resistant waterproofing
To simplify your task and achieve reliable protection from moisture, you can use a special liquid waterproofing, which does not need additional protection. What are its features? The composition of such a mixture contains special components that provide waterproofing resistance to UV rays, temperature changes, chemicals and acids.
Waterproofing, which does not need protection, combines the properties of two materials at once – the waterproofing itself and its protection from the external environment. By choosing such a material, you can significantly save time and money needed to protect the external and internal elements of the building. What kind of material should I choose? We recommend paying attention to the Teknomer 600 1K UV.
Teknomer 600 1K UV is the best waterproofing solution
Teknomer 600 1K UV is a new generation sealing polyurethane compound. The one-component water-based composition is resistant to ultraviolet and other atmospheric influences. The mixture is completely ready for use and hardens upon contact with moisture in the air.
Teknomer 600 1K UV waterproofing can be used for:
- protection of building foundations
- exterior facades
- roofs
- drains, terraces, balconies
- sheet and wooden materials
Teknomer 600 1K UV waterproofing polyurethane compound is characterized by excellent elasticity, which persists even at low air temperatures. Due to this, high frost resistance is achieved. The protective layer creates a reliable waterproof coating that does not crack and is resistant to sunlight. In addition, waterproofing helps protect concrete from carbonation, which destroys it from the inside.
When applied, Teknomer 600 1K UV leaves no joints through which moisture can penetrate. Completely frozen waterproofing, applied in several layers, does not need further additional protection.
