Rainwater drainage from balconies and terraces
Today we will talk about an indispensable element on any terrace and balcony – a double-hull ladder.
A double-hull ladder is used to drain rain and industrial water, protects the surface from moisture, which leads to the destruction of the coating.

Double-hull ladders are made of durable materials, the grilles are made of stainless steel, the remaining elements are made of plastic.Advantages of ladders:
Multifunctionality – used on almost any outdoor terraces.

- Prevent the penetration of moisture into buildings.
- High throughput.
- Strength and compactness
- Resistance to chemical, mechanical and thermal influences
At the design stage, it is necessary to remember the following requirements in order to avoid errors in use:Each ladder has its own estimated catchment value.
- Important parameters for the selection of the ladder are the estimated amount of rainwater (Q, l/s) and its throughput (K, l/s)
- It is necessary to pay attention to the place where the waterproofing is joined to the flange to prevent water leakage
- To drain rainwater from balconies and terraces, there should be a separate storm sewer with vertical drainage with horizontal drainage
How the installation process works:It is necessary to determine the direction of the outlet
- Installation of the ladder is installed at the lowest point of the surface
- The housing is securely installed in a place where it comes into contact with other structural elements
- Next, it is necessary to securely fasten the ladder body in places of contact with the structure
- Special membrane and flange made of stainless steel, mounted with waterproofing and vapor barrier of the terrace floor itself
- For easy maintenance of the ladder, it is necessary to provide free access
Additional products
Plastic siphon with bitumen membrane and clamping flange D100, vertical
382
uah / PCS.
343
uah / from 10 PCS.
Two-body shower drain NEPTUN 425 XL 12.2x12.2 cm, horizontal outlet DN50, dry seal, with stainless steel grate
968
uah / PCS.
Double-shell shower drain NEPTUN 421 L 12.2x12.2 cm, vertical outlet DN110, water trap, with stainless steel grate
907
uah / PCS.
Double-shell shower drain 15x15 cm with clamping flange, horizontal, square grate
838
uah / PCS
754
uah / from 10 PCS
Double-body shower drain 15x15 cm with a pressure flange, vertical Ø100 mm, square grate
838
uah / PCS
755
uah / from 10 PCS
Balcony and terrace drain 10x10 cm, horizontal outlet DN70, combination shutter, with stainless steel grate
675
uah / PCS
607
uah / from 10 PCS
Drain for balcony and terrace 15x15 cm, horizontal outlet DN70, combined shutter, square grate
735
uah / PCS
661
uah / from 10 PCS
Double-body drain 15x15 cm with pressure flange, horizontal, square grid
838
uah / PCS
754
uah / from 10 PCS
Double-body balcony ladder 15x15 cm with a pressure flange, vertical Ø100 mm, square grate
838
uah / PCS
754
uah / from 10 PCS
Extension element for a 10x10 cm drain, vertical outlet DN100, combined shutter, stainless steel grate
320
uah / PCS
Копия Plastic siphon with bitumen membrane and clamping flange D100, vertical
430
uah / PCS.
387
uah / from 10 PCS.
Double-shell shower drain 15x15 cm with clamping flange, vertical, square grate
911
uah / PCS.
819
uah / from 10 PCS.
Extension element for drain 10x10 cm, vertical outlet DN100, combined shutter, with stainless steel grid
375
uah / PCS
337
uah / from 10 PCS
Extension element for drain 15x15 cm, vertical outlet DN100, combined shutter, with stainless steel grid
465
uah / PCS
418
uah / from 10 PCS

