Flat roof aerator, 110x600 mm, bituminous apron Sanpol

Aerator is a device for ventilation of the under–roof space, removal of water vapor and moisture. The aerator is indispensable for reliable and long-lasting operation of a flat roof, as it prevents the formation of condensation and removes moisture from the thermal insulation ball of the roof, preventing the formation of swellings of the rolled roofing material during temperature changes. They are used both in new construction and in the reconstruction of existing flat roofs.

Thanks to aerators, thermal insulation remains dry, indoor air quality improves, and heating costs are significantly reduced.

specificationsRoofing aerators are collapsible.

Standard equipment:Aerator housing with shock-resistant and weather-resistant polypropylene, D=110mm, H=600 mm

•  
• Aerator cap
• Complete with a PVC apron simplifies installation on roofs with PVC materials. It is installed on 100 m2. The distance between the aerators should not exceed 12 meters.

Mounting:The aerator apron is pressed into the mastic layer so that the remnants of the binder are squeezed out from under it.

•  
• With a two–layer coating, the aerator apron is covered with the top layer of the roofing carpet, and with a single layer, the main roofing carpet does not enter the apron.
• With a single-layer roofing, mastic is applied to the upper part of the aerator apron.
• With a single-layer coating, a patch is installed on the aerator apron, which should overlap the roofing carpet by 150 mm.