Product code: 100005213
Manufacture`s article: 0000o5692
Bituminous mastic on water for waterproofing and gluing Izoplast W-KL heat-insulating boards, 20 kg ADW
Izoplast W-KL is a water-based bitumen-rubber mastic for creating lightweight, seamless waterproofing coatings. For gluing foam boards, expanded polystyrene (EPS, XPS) and mineral insulation to concrete, brick and plastered surfaces.
Application:
- To create seamless, thick-layer elastic and moisture-resistant coatings, both on horizontal and vertical surfaces
- For bonding rigid thermal insulation boards made of EPS or XPS styrofoam
- To create waterproofing resistant to aggressive weather conditions
Advantages:
- Easy to use
- Does not contain solvents
- High adhesive properties
- Creates a seamless insulation layer
- High adhesion to mineral surfaces
- Seamless waterproofing of vertical and horizontal surfaces
Instructions for use:
Mix before use. The surface must be smooth, free of dust and dirt. The concrete surface must be primed with IZOPLAST DYSPERBENT, or, if necessary, apply the necessary waterproofing layer.
To use as a waterproofing layer, apply the thoroughly mixed mass of Izoplast W-KL to the surface with a brush, spatula or roofing brush.
For gluing plates made of styrofoam or expanded polystyrene, Izoplast W-KL is applied to the plate in strips 4 cm wide and 1.5 to 5 mm thick around the perimeter with an interval of 30 cm, or 20 points with a diameter of 5-10 cm per 1 m2.
Application Notes/Restrictions:
Observe the safety and health regulations during the work. Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor. Work with IZOPLAST W-KL should be carried out in windless weather without precipitation at ambient temperatures from +5°C to +25°C.
Composition - water-based bitumen-rubber emulsion
Color - Black
Packing - 20 kg bucket.
Drying time - ≤ 6 hours
The interval between applying layers is 3 hours
Consumption (waterproofing) - 0.6-1.0 kg/m2
Consumption (bonding of XPS plates) - 0.8-1.2 kg/m2
Water resistance after - 6 hours
Application temperature from - 5°C to 25°C
The remaining dry weight is 75 %
What is the consumption of Izoplast W-KL bituminous mastic?
0.6-1 kg/m2 per 1 mm layer with waterproofing device
0.8-1.2 kg/m2 per 1 mm layer when gluing polystyrene slabs
Additional products
Other products in the category
External waterstop ND 320 PVC for expansion joints, blue, 20 lm, Sanpol Ukraine
Useful articles
