Water-based bitumen-polymer mastic Izoplast 2K-W, 32 kg ADW

Izoplast 2K-W is a water–based bitumen-polymer emulsion modified with a synthetic polymer for applying thick-layer elastic water-repellent coatings.

Application:

• To perform thick-layer waterproofing, interlayer waterproofing for monolithic screeds
• In rooms with high humidity, balconies and terraces
• For gluing insulation boards (EPS, XPS), rolled materials for thermal and waterproofing

Advantages of the material:

• Ready to use
• It has high adhesion
• Suitable for all types of horizontal and vertical surfaces
• Suitable for protecting foundations and other underground parts of buildings
• Does not contain harmful substances
• May be in contact with drinking water
• It has excellent penetrating properties
• Can be used on wet surfaces
• Protects building elements from the effects of aggressive substances

Surface preparation:

Before applying the material, the surface must be cleaned of dirt, dust, oils and other substances that interfere with adhesion.

It is necessary to use Izoplast 2K-W on fresh concrete surfaces after the end of the concrete drying period.

Preparation of the material:

Mix the material thoroughly before use.
To be used as a primer, Izoplast 2K-W must be diluted with clean water in a ratio of 1:1.

Application of the material:

IZOPLAST 2K-W is applied to a pre-primed surface with a smooth trowel or a notched trowel.

The next layer should be applied after the previous one has completely dried. The drying time depends on the temperature and humidity of the environment and the substrate (about 8 hours). Complete drying – after about 3 days.

Recommendations for use, storage and transportation:

• Mix well before use
• Store and transport at a temperature not lower than 5°C,
• Follow the weather conditions according to the instructions
• Read the product safety data sheet before use