Product code: 100005618

Water repellent Teknosil W TEKNO

354

uah / l

Teknosil W is a water-repellent water-based material that impregnates the surfaces of building elements, protecting them from external factors. After application, it gives the surfaces water-repellent properties.

Where it is used:

On the siding of the facade of buildings.
On vertical surfaces.
On surfaces that are less absorbent: concrete, marble, granite, slate.
On porous surfaces: brick, colored brick, aerated concrete, travertine.
It is used to protect historical monuments from atmospheric influences.

Features and Benefits:

A material with a high penetrating power.
Reduces the negative impact of the atmosphere.
Resistant to alkalis and UV rays.
Water-based.
The material is vapor permeable.
Keeps building elements dry, increasing strength characteristics.

Instructions for use:

The surface must be dry, durable, clean, free of any dust, oil, dirt, rust, mold, which prevent the penetration of the material.
If there are cracks or depressions on the surface, they should be repaired with the appropriate repair solutions of Teknorep. Apply TEKNOSIL after repair should be in 3-4 days.
The material is ready for use, no foreign substances should be added.
When applying the first layer, the material should be applied with a roller, brush or spray suitable for dry surfaces for maximum penetration. The second layer should be applied after about 4 hours. For porous surfaces , it is possible to apply another layer .
After application, it should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above +35 °C), rain.
Immediately after application, the equipment must be cleaned with water before it hardens. After the product hardens, it should be cleaned by mechanical methods.

Application Notes/Restrictions:

Follow the safety regulations. Use gloves, masks, glasses when using the product.
Avoid contact with skin and eyes.
Do not apply on PVC and metal surfaces.
Do not add foreign substances to the material.

View	White liquid
Packaging	Jar – 1 liter
Expiration date	12 months
Expenditure	150-200 gr/m²
Density	1,0 ± 0,1
Drying time	45 - 60 minutes
Operating temperature	-25°C...+80°C