Hydroseal Teknoplug for quick stop of leaks, 20 kg TEKNO

2 160

uah / bucket

Teknoplug is a fast—setting repair compound based on special cements and active chemical additives for instant stopping of active water leaks, installation and repair work.

Where it is used:

basements, elevator pits
highways, subways, tunnels, dams
reservoirs, pools, reservoirs with drinking water
it is used for fastening metal anchors and fasteners.

Advantages:

easy to use for quick repairs
for fixing metal anchors and fasteners
instant setting in contact with water
environmentally safe
high adhesion to the surface
high water resistance, frost resistance, durability

Instructions for use

The application surface must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. Teknoplug material is a dry mixture that must be kneaded with water in the proportion of 270 ml per 1 kg of composition to a plastic state.

At high temperatures or in order to slow down the setting, the material is closed with cold water. At low temperatures or in order to accelerate the setting process, it is closed with warm water +40°C .The solution must be mixed manually, and in a small amount to be used for 1 min. Having given it the necessary shape, you need to wait until the composition begins to set, but at the same time it must maintain plasticity. It is necessary to lay the solution in the repaired area and hold it until the leak stops completely. If the leak occurs from a large hole, the sealing process takes place in several steps.

Use gloves when mixing and applying. After applying Teknoplug — Teknomer 100 must be applied to the surface for absolute waterproofing protection.

Colour	Gray
Application temperature	+5°C...+30°C
Packaging	Bucket 20 kg
Mixing	270 gr. water per 1 kg of powder
Expiration date	6 months in the closed original packaging
Viability	Maximum 1 minute
Material consumption	~ 2 kg per 1000 cm³
Full curing time	2 minutes