Product code: 100005209
Manufacture`s article: 0000o5780
Hydroseal high-speed Teknoplug for a quick stop of leaks, 2 sec, 3kg TEKNO
Teknoplug Yildirim is an instantly grasping repair compound based on special cements and active chemical additives to instantly stop active water leaks from cracks, joints, seams. It can be used without the need to mix with water.
Where it is used:
- basements, elevator pits
- highways, subways, tunnels, dams
- reservoirs, pools, reservoirs with drinking water
Advantages:
- easy to use for quick repairs
- instant setting in contact with water
- does not cause corrosion, does not contain toxic elements
- high water resistance, frost resistance, durability
- high adhesion to the surface
Instructions for use
The application surface must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. The Teknoplug Yildirim material is a dry mixture that must be kneaded with water in the proportion of 200 ml per 1 kg of the composition to a plastic state.
The solution must be mixed manually, and in a small amount to be used for 1 min. It is necessary to lay the solution in the repaired area and hold it until the leak stops completely.
For use in powder form, apply the required amount to the leak site and hold until the leak stops completely.
Use gloves when mixing and applying. After applying Teknoplug Yildirim - Teknomer 100 must be applied to the surface for absolute waterproofing protection.
|
Colour |
Gray |
|
Application temperature |
+5°C...+30°C |
|
Packaging |
Bucket 3 kg |
|
Mixing |
0.2 liters of water per 1 kg of powder |
|
Expiration date |
6 months in the closed original packaging |
|
Viability |
< 1 minute |
|
Material consumption |
~ 2 kg per 1000 cm3 |
|
Full curing time |
1 minute |









