Product code: 100005652
Manufacture`s article: 0000o3622
Combined waterstop KAB-150 mm, 25 lm Forbuild
The KAV 150 hydroshponk with a cord made of hydrophilic rubber is combined for use in working and structural seams. KAB150 key is a key with an expanding hydrophilic cord for sealing and waterproofing structural joints of concrete structures. Even at high water pressure, the combined KAB key provides waterproofing due to the expanding rubber cord and the ribbed part of the key itself. KAB key is an effective system against water penetration, and also easy to install.
- there is no need to make a suture protrusion or change the reinforcement system
- simple installation in a concrete structure with low labor costs
- stability during installation due to mounting brackets
- end heat welding joint to joint
- small bending radius
- reliable sealing and waterproofing are provided due to the ribbed part of the key and the expanding cord round in cross section
Изделия серии KАB предназначены для герметизации и гидроизоляции технологических швов в бетонных конструкциях зданий и сооружений.
KAB гидрошпонка – это шпонка с расширяющимся бентонит-каучуковым шнуром для герметизации конструктивных швов в бетонных конструкциях.
Изготовлена из высококачественного пластифицированного ПВХ. Расширяющийся шнур установлен в краевой паз.
Монтаж гидрошпонки KAB 150 производится путем закрепления шпонки в скобы, с шагом 400 мм, которые поставляются в комплекте.
Соединение гидрошпонки между собой выполняется сварочным топориком, или термопистолетом.
Надежное уплотнение и гидроизоляция обеспечиваются за счет ребристой части шпонки.
Ширина 150 мм.
Продается в бухтах по 25 м.п.
Appearance - Without cracks and fractures
Shore hardness Sh 83±5
Tensile strength MPa ≥8
Elongation at break % ≥200
Tensile strength N/mm ≥12
Behavior at low temperatures, -20o C,
elongation at break % ≥100
Where is the waterstop KAV-150 used?
Where is the KAV-150 hydroshpon used?
KAV tapes are successfully used in sewage treatment plants, swimming pools, reservoirs, residential buildings, etc. KAV tapes effectively seal construction seams under hydrostatic pressure up to 0.2 MPa, below the ground water level with a variable level, for example, in basements or tunnels. The tape is not sensitive to water pollution - alkaline and acidic.
How is the waterstop KAV-125 used?
How is the KAV-150 hydroshponka used?In the case of installing the key before pouring the concrete of the lower KAV plate, the key is installed directly on the reinforcing bars and secured with clips with an interval between clips of 0.5 m.
In the case of installing a key during or immediately after pouring concrete, the key should only be inserted into the freshly laid concrete, after which the concrete mixture can be compacted by vibrating in the usual mode.
The marking strip located at a height of 3.0 cm from the edge of the key serves as a depth control of the installation.
The maximum depth of immersion in concrete of the lower part of the key with an expanding profile is 4.0 cm.
Other products in the category
Useful articles
