Product code: 100005615

Polyurethane waterproofing Teknomer 600 1K, 20kg TEKNO

3 400

uah / bucket

One-component elastic waterproofing material based on polyurethane Teknomer 600 1K. Polymerizes when interacting with moisture and creates an elastic protective layer.

Where it is used:

reliable waterproofing of foundations and concrete structures
terraces, roofs, balconies and gutters
suitable for outdoor use
to protect wooden and metal surfaces

Advantages:

Easy to apply (by brush or spray)
Retains its elasticity even at low temperatures
It has high frost resistance
Excellent adhesion even on difficult surfaces
Retains strength and quality characteristics in a wide temperature range (-30 °C/ 70 °C)

Instructions for use

The application surface must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. If there are areas in the form of cracks, cavities on the surface - they should be repaired beforehand with the help of convenient cement mixtures Teknorep 300 and Teknorep 300EX. The insulated surface must be dry and prepared.

Use Teknobond 300 as a primer. After its curing, you can start applying Teknomer 600 1K. Before use, mix with a low-speed mixer until a homogeneous mixture is obtained. The mixing time is at least 5 minutes. The material is ready for use and does not require dilution with water and other liquids. Do not work in direct sunlight

The ready-to-use material is applied to the surface with a wide brush or spray. Apply in two layers. The direction of application in each layer should be perpendicular to the previous one. The time interval between applying layers is at least 1 hour.

After application, protect the surface from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above 35 °C), rain and frost. The equipment must be cleaned with a solvent immediately after use.

Colour	White
Density	1.25 ± 0.03 kg/l
Packaging	Bucket 20 kg
Full drying time	16 -24 hours at a temperature of 23 °C
Dry mass residue	80 %
Ultimate strength	> 1.5 N / mm2
Tensile strength	> 500 %
Expiration date	12 months in the closed original packaging