Product code: 100005412
Manufacture`s article: 0000m0120
Sealing PVC profile Herringbone for dividing and expansion joints 5.2 mm, 200 r.m. Sanpol
The 5.2 mm sealing profile is used as an alternative to mastics, for sealing temperature and separation seams. Allows you to significantly save installation time. The seal is made of extruded PVC, flexible, suitable for internal and external use. It is intended for use in separation and temperature joints, in poured industrial and concrete floors.Sealing tapes and harnesses are used for sealing and sealing expansion joints in all types of walls and floors. They are used between various elements of buildings in concrete panels, facades. Sealing tapes are made of extruded PVC. Easily compressed, able to compensate for changes in the width of the seam.
Features:Suitable for indoor and outdoor use
- Designed for use in separation and temperature joints
- Designed for industrial and concrete floors
- Resistant to temperature and mechanical influences
- Have a longer service life
- They are used in all types of walls for sealing and sealing expansion joints in concrete panels, facades
- Sealing tapes are suitable for internal and external applications
Sold in bays of 200m.
The herringbone sealer from Sanpol is an elastic material designed to fill temperature-shrinkage seams formed as a result of work with a seam cutter or a grinder. The sealing profile is easy to install, the seam is filled immediately after cutting, while you do not need to expect the concrete to reach the required humidity. At the same time, production times are reduced and costs are reduced, which makes the whole process of sealing the seam cheaper. Before installing the herringbone sealer, there is no need to clean the seam and treat the seam with a primer. In comparison with the sealant, if necessary, the material can be easily replaced with a new one.
- The seal is made of extruded PVC, flexible
- suitable for indoor and outdoor use
- designed for use in separation and temperature joints
- in floodplain industrial and concrete floors
- it is used as an alternative to mastics
- for sealing temperature and separation joints
- allows you to significantly save installation time
Sold in bays of 200 m
The seal is made of extruded PVC, flexible, suitable for internal and external use. It is intended for use in separation and temperature joints, in poured industrial and concrete floors.
The sealing profile is used as an alternative to mastics, for sealing temperature and separation seams. Allows you to significantly save installation time.
Manufacturer: Ukraine
Material: EPDM
Dimensions:: 3,8; 4,2; 4,6; 5,0; 5,2; 6,0; 6,5; 7,0; 10; 12
Color: Grey
Bay: 100-200m
Chemical resistance: resistant to alkaline solutions, acid solutions, detergents, animal and vegetable fats, steam cleaning
What materials can be used to fill and well waterproof expansion joints in concrete floors?
For filling and good waterproofing of expansion joints in concrete floors, we recommend using:
- Polyurethane sealants
- Sealants based on MS polymers
- Sealing harnesses
What are the basic requirements for the material?
The main requirements for any material with which the seam will be filled – it must be elastic, hardy and have high adhesion to concrete.
What are expansion joints?
Compensatory, temperature, shrinkage seams are artificial incisions that prevent concrete cracking from temperature and shrinkage extensions of the screed.
