How to repair a concrete floor in a warehouse

In warehouses, workshops, and large enterprises, the concrete floor screed is subjected to serious loads, both dynamic and aggressive environmental factors. Often, chemicals, drying oils, oil, gasoline, and other active substances are spilled on the floor in warehouses, which negatively affect the condition of the concrete plane. Naturally, it is much cheaper to repair the old screed than to do capital work on replacing the concrete structure. Today we will consider special repair mixes designed for floors in warehouses. 

High-quality repair mixes Repair mix Teknogrout 350 (Teknogrout 350) is perhaps one of the most popular options for repairing concrete floors in warehouses.

• The one-component composition belongs to the group of available self-leveling mixtures, which allows you to repair large-area concrete floors with the least time. It has high adhesion and strength, is suitable for indoor and outdoor use, which is especially important for open-type warehouse hangars. The mixture has no shrinkage and is characterized by good fluidity, which makes repair work much easier. Apply 10-75 mm thick, put into operation 24 hours after pouring. 
• Teknogrout EX mixture is widely used for the repair of reinforced concrete surfaces, including railway tracks, as the material quickly gains strength (1-2 hours), which is especially important to save time. Teknogrout EX is also used for the construction of foundations for industrial equipment, so it is suitable for repairing concrete floors in a warehouse designed for operation with increased loads. The mixture is waterproof, not exposed to aggressive substances and resistant to freezing and thawing. 
• The one-component composition of Teknogrout XXL (Teknogrout XXL) was developed as a repairman for the bases of wind generators, and therefore has a number of irreplaceable characteristics. These include the possibility of application to old surfaces, a set of strength at a temperature of 2 degrees, high adhesion, strength and resistance to carbonation. Teknogrout XXL repair compound is widely used for repairing floors in warehouses with low temperatures, as the mixture does not leak water and is resistant to thawing and freezing. The permissible total thickness of the application is from 10 mm to 400 mm, with a thickness of one layer up to 150 mm. 

The pricing policy of the described repairmen for concrete floors is generally moderate, which allows you to repair floors in a warehouse within a not exorbitant, average budget. All modern mixes are very easy to work with, which saves valuable time and reduces labor costs for repairing concrete floors.