Waterproofing of balconies and terraces
Open balconies, terraces, loggias, verandas are architectural elements that become the decoration of the building, as well as give comfort and coziness from staying on them. Here you can spend your free time and receive guests. And in commercial buildings, such elements can be used to equip a cafe, restaurant, lounge area or any place for recreation and leisure in the fresh air, and even with a beautiful landscape.
At the same time, open areas of structures can add to the owners of problems with their maintenance and forced repairs, they often leak, which even causes the tiles to explode. Rain, snow, solar radiation, temperature changes, this significantly reduces the service life of open areas of buildings.
To extend the service life of terraces and balconies, to protect them from external influences and damage, it is necessary to take care of high-quality waterproofing. To do this, use polyurethane mastic POLYURETHANE PRO from TM Admix.
POLYURETHANE PRO is a liquid waterproofing membrane that has the property of overlapping cracks, and dries due to air moisture. It has excellent adhesive properties to many surfaces, creates a resistant elastic layer, is resistant to mechanical stress and chemicals.Advantages of using POLYURETHANE PRO liquid rubber:
Seamless
- Elasticity
- Resistance to constant water
- Excellent adhesive properties
- High resistance to UV and frost
- Chemical resistance
- Vapor-permeable material that allows the surface to "breathe"
- Cold-applied material. Easy to apply with a brush, roller or airless spray device
- It has the property of overlapping cracks
- Suitable for areas with light pedestrian traffic
- Retains its physical properties in the temperature range from - 30ºC to 90ºC
- After drying, it does not contain toxic substances
Applies:Balconies, terraces, verandas, loggias
- Waterproofing of open roofs
- Car parking
- Irrigation channels, drains
- Platforms and Bridges
- It is used on surfaces made of concrete, metal and wood
- Waterproofing on roofing material, PVC, EPDM, gypsum and cement slabs
In order to perform waterproofing with a POLYURETHANE PRO liquid membrane, you do not need to have special skills. The material is applied in two layers using a combed spatula, brush, roller or airless spray device on a pre-prepared and grounded surface. For this purpose, the primer POLYPRIME AST101 is used.
POLYURETHANE PRO liquid membrane is ready for use and does not require dilution with solvents. The surface after application should be protected from rain, mechanical influences and other external influences until the material dries completely. The time of interlayer application is 8-12 hours.
