Product code: 100005450

Corner fender CG 76A Arfen

2 130

uah / m.p.

CG76A vinyl bump on an aluminum frame, great for hospitals, emergency departments and emergency departments. This system is used to protect corners and is the widest of the entire line of corner bumpers, which allows you to protect the corner as much as possible from being hit by a gurney, stroller, stretcher, trolley and others. It is also ideal in surgeries, intensive care units, neurological departments, elevator openings and other weak and highly passable places.

Accessories:

Vinyl profile - 2 mm
Aluminum Profile
Plug

Mounting:

Determine the point height of the protective element for the corner.
By default, ARFEN supplies 3-meter vinyl and aluminum elements, so it is enough to cut both the frame and the vinyl once, and we get two ready-made elements of 1.5 m each to protect two corners. As a rule, protection of corners is not needed above 1.5 m. Note: Cut clearly at 90 degrees.
Cut the aluminum profile to size.
When installing on drywall walls and bricks, drill holes first in aluminum, and then through the profile in the wall.
Or mount the frame above the baseboard, taking into account the thickness of the lower plug, or mount the protective frame from the floor itself, tearing the baseboard at the corner. In the latter case, the lower plug is not necessary; Drywall: 4x50 mm self-tapping screw, mounted in the profile of drywall. Concrete wall: 4x50 mm self-tapping screw and 6 dowels. Brick: 4x50 mm self-tapping screw and 6 mm dowel. Install the plugs.
Measure and cut off the vinyl lining so that it fits snugly to the plug. Note: Without a bottom plug, the aluminum should fit snugly to the floor so that the vinyl lining does not come down.
Install vinyl on an aluminum frame.

Important: Store materials in a clean and dry room at a temperature between 10 °C - 40 ° C.

Note: This model is equipped with only finite elements.

Corner bump for an obtuse angle of 135°

Size: 76x76 mm

Base: aluminum profile

Profile length: 3 m

With this profile, plugs, external and internal corners, accessories are additionally sold.

Model	Profile length	Profile width	Profile thickness	Angle degree	Number of shock-absorbing inserts	The final element	Number of possible colors
CG50	3 m	25x25 mm	10 mm	90°	-	WG012	5 colors*
CG51	3 m	53.6x53.6 mm	12 mm	90°	-	WG037	5 colors*
CG763 m	76x76 mm	10 mm	90°	-	WG008	5 colors*	CG76A
3 m	76x76 mm	10 mm	135°	-	WG009	5 colors*	* the entire color palette consists of 32 colors and is available when ordering from 300 m.p. of each item