Product code: 100005099
Manufacture`s article: 1088877/U
Radiator manifold Uni-X H 1"SN 3XG3/4 Euro, 6 circuits Uponor
Uponor Uni-X H 1 radiator collector for heating systems with 6 outlets. It is made of coated brass, with a 1“ BP cap nut and an end gasket on one side, and a 1/2“ HP plug on the other side. The distance between the outputs is 50 mm. There is an air vent on each collector. Color marking of the feed and return. The outputs have 3/4“ HP Euroconus external thread according to DIN V 3838 and are intended for use only with Uponor 3/4“ BP Euroconus threaded adapters. It is supplied assembled with a plastic bracket of increased noise insulation. Maximum coolant flow per collector 3.5 m3/h.
Equipment:
- Supply and return manifolds with air vents
- Cap nut
- End gasket
- Stubs
- Plastic bracket
Technical specifications:
- Material brass
- Maximum operating temperature +90 °С
- Maximum working pressure 6 bar
- The collector inputs are made with a 1“HP cap nut
- The outputs have an external thread 3/4“HP Euroconus
- The distance between the outputs is 50 mm
An important characteristic of the Uponor collector is the number of outputs — it is equal to the number of pipe loops that are connected to the collector. Depending on the material, the distribution manifolds can be steel and plastic (modular). The configuration of the collector may differ depending on the specifics of the specific case of the heating device, but it necessarily includes a supply and return collector. Externally, any collector looks like a pipe with threaded outlets for connecting pipes.
| Material | Brass |
| Maximum operating temperature | +90 °С |
| Maximum operating pressure | 6 bar |
| Distance between outputs | 50 |
| Number of outputs | 6 |
| Width | 272 |
| Equipment | Feed, return manifold, cap nut, End gasket, plugs, plastic bracket |
Other products in the category
Panel for laying pipes with a diameter of 14-18 mm, area 0.41 sq. m
