Modular manifold PPSU 6 circuits for heating and cooling systems Uponor

7 200

uah / PCS.

The Uponor modular collector with 6 outlets performs the function of monitoring and distributing water throughout the system. The kit includes a supply and return manifolds made of fiberglass-reinforced polyamide, as well as a flow meter. The feed collector is equipped with an adjustable flow meter with a scale from 0 to 4 l/min to balance the flow in the loop, with the possibility of complete closure of the loop. There is an adjustment valve on the return manifold for manual adjustment. Modules for 1,3,4,6 loops, combined with each other up to a maximum of 12 loops.

PPSU Material
Maximum operating temperature 60 °C
Maximum working pressure 6 bar
The distance between the outputs is 50 mm
The distance between the feed and return manifolds in height in the axes is 225 mm

An important characteristic of the Uponor collector is the number of outputs — it is equal to the number of pipe loops that are connected to the collector. Depending on the material, the distribution manifolds can be steel and plastic (modular). The configuration of the collector may differ depending on the specifics of the specific case of the heating device, but it necessarily includes a supply and return collector. Externally, any collector looks like a pipe with threaded outlets for connecting pipes.

Material	PPSU
Maximum operating temperature	+60 °C
Maximum operating pressure	600 kPa (6 bar)
Distance between outputs	50 mm
Number of outputs	6
Width	300 mm
Set	Feed collector, return collector, flow meters (6 pcs)