Steel manifold Smart S with flow meters 3 circuits X 3/4 EURO Uponor

4 244

uah / PCS.

The steel collector with Uponor Smart S flow meters for 3 outputs is used in various heating and cooling systems.

Equipment:

Supply and return manifolds with air vents
Brackets with sound-absorbing clamps
Two side pivoting units with filling/draining outlets and 3/4“ plugs
Adjustable flow meters with a scale from 0 to 5 l/min on the feed manifold for balancing the flow in each loop, with the possibility of complete closure of the loop

Technical specifications:

Material stainless steel
Maximum operating temperature +60 °С
Maximum working pressure 6 bar
The collector inputs are made with a 1“HP cap nut for a flat seal (include end sealing gaskets)
The outputs have an external thread 3/4“HP Euroconus
The distance between the outputs is 50 mm
The distance between the feed and return manifolds in height in the axes is 200 mm

An important characteristic of the Uponor collector is the number of outputs — it is equal to the number of pipe loops that are connected to the collector. Depending on the material, the distribution manifolds can be steel and plastic (modular). The configuration of the collector may differ depending on the specifics of the specific case of the heating device, but it necessarily includes a supply and return collector. Externally, any collector looks like a pipe with threaded outlets for connecting pipes.

Material	Stainless steel
Maximum operating temperature	+60 °C
Maximum operating pressure	600 kPa (6 bar)
Distance between outputs	55 mm
Number of outputs	3
Width	245 mm
Set	Feed manifold, Return manifold, Mounting bracket, Air valve, Fill/Drain tap