Product code: 100026785
Manufacture`s article: 1046912
Press elbow with internal thread Ø50-Rp1 1/2" Uponor S-Press PLUS Uponor
The Uponor 50-Rp1 1/2" press elbow is a high-quality fitting designed for reliable and leak-proof connections of metal-plastic pipes in heating and water supply systems. This product combines a Ø50 mm press connection with an Rp1 1/2" threaded connection (internal thread).
Uponor fittings are made of brass and stainless steel, which ensures high strength, corrosion resistance and a long service life, even under intensive use.
Characteristics
- Connection type: press/internal thread
- Pipe diameter: 50 mm
- Thread: Rp1 1/2" (internal)
- Angle: 90°
- Body material: brass, stainless steel.
- Working pressure: up to 10 bar
- Operating temperature: up to +95 °C
- Manufacturer: Uponor (Germany/Finland)
Application
- Press elbow Uponor 50-Rp1 1/2" is used in systems:
- water supply (hot and cold)
- heating (radiator, underfloor)
- domestic and industrial pipelines
The fitting provides a secure angular connection of the pipe with threaded elements, such as manifolds, shut-off valves or other types of fittings.
Uponor 50-Rp1 1/2" guarantees durability, watertightness, and professional installation quality. It's the ideal solution for systems where secure and stable connections are essential.
Advantages of the Uponor 50-Rp1 1/2" press elbow with internal thread
- Reliable press connection without the need for additional seals
- Tightness and resistance to high pressure
- Withstands temperature changes and exposure to water
- The convenient shape of the knee allows installation in hard-to-reach places.
- Compatibility with Uponor MLC pipes (metal-plastic pipes)
- Equipped with a fixed press sleeve
- Has a retaining ring
Areas of use
- Tap water: Continuous operating temperature is 0 to 70°C at maximum continuous operating pressure
10 bar. The short-term failure temperature is 95°C for 100 hours during the service life.
- Heating: Continuous operating temperature is up to 80°C at a maximum continuous operating pressure of 10 bar. Short-term failure temperature is 100°C for 100 hours over the service life.
- Product type: press-elbow fitting
- Connection type: press/internal thread
- Pipe diameter: 50 mm
- Thread: Rp1 1/2" (internal)
- Length, l2: 78.5 mm
- Parameter, z2: 40.8 mm
- Length, l1: 59 mm
- Parameter, z1: 37.6 mm
- Angle: 90°
- External and internal threads according to EN 10226-1
- Body material: brass, stainless steel.
- Working pressure: up to 10 bar
- Operating temperature: up to +95 °C
- Manufacturer: Uponor (Germany/Finland)
Other products in the category
Panel for laying pipes with a diameter of 14-18 mm, area 0.41 sq. m
