Steel manifold with flow meters 7 circuits Smart S Ø1 NG x 7 x 3/4″ Uponor Uponor

9 948

uah / PCS.

A steel manifold with Uponor Smart S flow meters for 7 circuits Ø1 NG x 7 x 3/4″ is used in various heating and cooling systems.

Equipment:

Supply and return manifolds with air vents
Brackets with sound-absorbing clamps
Two side swivels with fill/drain outlets and 3/4" plugs
Adjustable flow meters with a scale from 0 to 5 l/min on the supply manifold to balance the flow in each loop, with the possibility of completely closing the loop

Specifications:

Material stainless steel
Maximum operating temperature +60 °C
Maximum operating pressure 6 bar
The manifold inlets are made with a 1" HP union nut for a flat seal (includes end sealing gaskets)
Outlets have external thread 3/4“HP Eurocone
Distance between outlets 50 mm
The distance between the supply and return manifolds in height in the axes is 200 mm

An important characteristic of the Uponor collector is the number of outputs — it is equal to the number of pipe loops that are connected to the collector. Depending on the material, distribution manifolds can be steel and plastic (modular). The configuration of the collector may differ depending on the specifics of the specific case of the heating device, but it necessarily includes a supply and return collector. Externally, any collector looks like a pipe with threaded outlets for connecting pipes.

Product type: collector
Material: stainless steel
Manifold inlets with 1" union nut (includes flat seals), available for right or left hand mounting
The hinge outlets have a 3/4" external thread for a Eurocone
Distance between outlets 50 mm
The distance between the upper and lower collectors in height in the axes is 200 mm
Flow meters with a scale from 0 to 5 l/min, with the possibility of completely closing the loop
The return manifold is equipped with balancing valves with the ability to install actuators
Maximum flow rate per collector – 3.6 m³/hour
Maximum operating temperature: 60°C
Maximum operating pressure: 6 bar
Number of circuits: 7
Kit: supply manifold, return manifold, mounting bracket, air valve, fill/drain tap
Article: 1086543
Manufacturer: Uponor (Germany)