Clamping plate for spiked membrane, 2 lm SNTDrain (Turkey)

114

uah / PCS.

The pressure plate for mounting the spike membrane is a special profile made of UV–resistant PVC designed to fix the spike membrane.The main task of the mounting plate (or as it is also called, the edge rail) is a reliable fixation of the profiled (spike–shaped) membrane, as well as preventing precipitation from falling under it. In addition, using a clamping bar, a beautiful aesthetic appearance of the membrane edge is created. The mounting of the bar is very simple. Special holes for the dowel have already been applied to the edge rail. It remains only to get a spike-shaped membrane under the bar and fix it with a steel dowel or screw with a wide bar to the foundation or base. If insulation is used on a vertical wall (foam, mineral wool, extruded polystyrene foam), it is necessary to trim the insulation plate so that it is possible to bring the membrane to the attachment point.

Application:Mounting of a spiked membrane on a vertical surface

Prevents the slipping of the spiked membrane from the foundation or plinth

The Z-shaped fastening bar is used for high-quality and reliable fastening of the spiked membrane on vertical surfaces and tight connection between each other in places of overlaps.

Material – PVC
Length – 2 m.p
Width – 7 cm

How to mount the clamping bar?

Mounting the bar is very simple. Special holes for the dowel have already been applied to the edge rail. It remains only to get a spike-shaped membrane under the bar and fix it with a steel dowel or a screw with a wide bar to the foundation or base.

How to use the spiked membrane and bar correctly?

Vertical application:Remove dust and debris from the surface.

Place the sheet on the surface so that the spikes face the wall.
Secure the sheets to the wall along the top edge of the base with a fastener.
The overlap of the sheets should be at least 20 centimeters.
If necessary, the connection can be fixed with a profile, hot air soldering or self-adhesive tape.

Horizontal application:Lay the sheet on the area with the spikes to the ground.

The leaves overlap with each other by at least 30 centimeters.
If necessary, the connection can be fixed with a profile, hot air soldering or self-adhesive tape.

Unfortunately there are no reviews yet. But you can fix it!