Spiked drainage membrane 600 g/m2, 2x20 m, 40 m2 Sanpreis

2 443

uah / roll.

The spiked membrane 600 SNTDRAIN EKL, due to its structure, is a material that is able to withstand significant loads from the ground. The spiked membrane has high compressive and tear strength and is resistant to moisture, fungi, soil bacteria and chemicals.It is used in multi-storey basements, garages, bridge connections, tunnel supports, in individual projects of drainage and drainage systems of roads, bridges, railway embankments. It is used in places where high compressive strength, impact strength and resistance to surface loads are required.It is also used for drainage and drainage of roads, bridges, railway embankments. The spiked membrane 400 SNTDRAIN EKL protects the outer bitumen insulation layer of foundations and engineering structures from possible mechanical damage during backfilling, and also protects the insulation during subsidence of the soil.

Application:

Protection of waterproofing of buried parts of buildings during the filling of the pit with soil
Protection of the foundation plate from capillary moisture
Rehabilitation of wet walls
In operated flat roofs, in green roofs
Replacement of concrete preparation
Protection of basements from penetration of radon gas
An additional layer of waterproofing
Water drainage and water pressure relief
Density 400 g/m2
Elastic, waterproof, durable
Color - black:

The spiked membrane 600 SNTDRAIN EKL has proven itself excellently in places where high compressive strength, impact strength and resistance to surface loads are required, for example, in deep multi-storey basements, garages, bridge abutments, tunnel supports, in individual projects of drainage and drainage systems of roads, bridges, railway embankments. Geomembranes protect the outer bitumen insulation layer of foundations and engineering structures from possible mechanical damage during backfilling, and also protect the insulation during subsidence of the soil.

Scope of application:

foundations up to 2 meters deep
basement and retaining walls
as a podbetonki
blind spots

Vertical application:

Remove dust and debris from the surface.
Place the sheet on the surface so that the spikes face the wall.
Secure the sheets to the wall along the top edge of the base with a fastener.
The overlap of the sheets should be at least 20 centimeters.
If necessary, the connection can be fixed by hot air soldering or self-adhesive tape.
Application temperature: - 5 °C to 30 °C

Horizontal application:

Place the leaf on the square with the spikes to the ground.
The sheets overlap with each other by at least 30 centimeters.
If necessary, the connection can be fixed by hot air soldering or self-adhesive tape.
Application temperature: - 5 °C to 30 °C

Storage conditions:

Store in a cool and dry place, in a package that protects against UV radiation.

The rolls must be transported in an upright position or stacked on top.

Pallets should be placed under rolls and stored away from direct heat sources.

Material – HDPE
Weight – 600 gr/sq.m.
Spikes height – 8 mm
Thickness ≥ 0.5 mm
Compressive strength 225 kN/m2 (±20%)
Color – black
Operating temperature range from -30°C to 80°C
The length of the steering wheel is 20 m.p.
Roll width - 2 m.p.

Resistant to chemicals and plant roots.

It is not harmful to drinking water.

It is resistant to acids, alkalis, oils and solvents.

It is resistant to rotting in the soil.

Country of origin – Turkey

* CE certified according to DIN EN 13967

What is a drainage membrane for?

The spike–shaped drainage membrane 600 SNTDRAIN EKL is a modern material with a wide range of applications. Depending on the type of application (foundations, roof, blind area, footboard, etc.), the spiked membrane performs the functions of drainage, waterproofing protection, replacement of the footboard, etc. And most importantly, it saves time on construction and increases the service life of structures.

Which side to lay the spiked membrane?

To remove moisture from the wall, as wall drainage, in the blind area system and the exploited roof – spikes and geotextile outside.

To protect the waterproofing from damage – spikes to the waterproofing.

To replace the concrete preparation – spikes down.

Unfortunately there are no reviews yet. But you can fix it!