Product code: 100007221
Manufacture`s article: 19043
Hanger for beams separate 135 mm, external type LAMA
210
uah / PCS.
The adjustable pole support is made of galvanized steel with a thickness of 2 mm and is designed for mounting beams of non-standard sizes. Due to the curly bend of the support, the wooden pole does not come into contact with the surface over which it is attached, which increases the wear resistance of the beam.
The support consists of two separate mirror parts and is installed together, forming a support for a beam of the required width. It is attached to 4 holes with a diameter of 5 mm and 2 holes for adjusting the width of 10 mm.
- Mounting side width (B): 90 mm
- Mounting height (C): 135 mm
Application
- wooden buildings
- wooden terraces
- installation of load-bearing frames
- installation of floor bases and ceilings and roofing systems
- gazebos, wooden canopies
Advantages
- it is attached to both a wooden base and a brick or concrete base.
- for fixing roof beams of different widths and non-standard sizes
- it is fastened with construction nails, universal screws or self-tapping screws for drywall on wood.
|
Tovschina metallu (mm) |
Rosemary |
|||
|
A |
B |
C |
Weight |
|
|
2 |
|
90 |
135 |
280 |
- Material: Galvanized steel
- Steel thickness: 2 mm
- Number of mounting holes: 4 with a diameter of 5 mm / 2 adjustable with a width of 10 mm
- Mounting side width (B): 90 mm
- Mounting Height (S): 135 mm
- Weight: 280 grams
- Article number: 19043
- Country of origin: Turkey
Unfortunately there are no reviews yet. But you can fix it!
