Lubricant for formwork summer spray (barrel 200 l) Sanpol

Formwork oil is a special solution for the treatment of formwork and components before pouring concrete. The oil has an excellent separating and anticorrosive effect, does not have an aggressive effect on plywood, cardboard and metal structural elements.The use of lubricants for molds and formwork can significantly improve the quality of concrete, foam concrete and aerated concrete products, can be used in conditions of technological steaming at high temperatures up to 80C, is used ready-made. The lubricant works effectively on both horizontal and vertical surfaces, does not drain under the influence of vibration and does not leave traces on the concrete surface. This is a really important material in construction and concreting, as it helps to provide a smooth separating surface between the formwork and fresh concrete, preventing the concrete from sticking to the formwork and ensuring the ease of removing the formwork after concrete hardening.

The formwork oil has the following advantages:

Separating ability: The oil effectively separates the formwork and concrete surfaces, preventing bonding.

Anticorrosive properties: The oil can protect the metal elements of the formwork from corrosion, which helps to maintain their durability.

Does not affect the quality of concrete: The use of oil does not adversely affect the properties and quality of the concrete itself.

Ease of use: The oil can be applied in various ways, such as roller, brush and brush.

Versatility of application: It is suitable for different types of formwork surfaces, whether wooden, plastic or metal.

Consumption is economical: The oil consumption per the surface area of the formwork is quite low, which is economical to use.

It is important to follow these recommendations for consumption and method of application to ensure a uniform and effective coating. Proper use of formwork oil can greatly facilitate construction processes, improve the quality of concrete products and extend the life of the formwork.

Method of application:

• you can apply the lubricant using a roller, brush or brush.
• you can apply the lubricant using a spray gun.

The grease for molds and formwork is ready for use, applied in a uniform layer over the entire surface of the mold.

Consumption of the working solution:

• On a wooden surface: 1 liter per 20-40 m2,
• On a plastic or metal surface: 1 liter per 65-80 m2