News

How to Protect Walls and Corners in Hospitals

The protection of walls and corners in hospitals and medical centers requires additional attention. Constantly a large number of visitors leads to the fact that the premises require more frequent repairs and more careful care of the walls and corners.

Is it possible to prevent the destruction of walls and corners without resorting to expensive repairs? - Wall bumpers are ideal for this. The coating material is resistant to disinfectants, withstands mechanical damage and impacts from the movement of couches and trolleys, is resistant to contamination.

Rooms in hospitals, hospitals and outpatient clinics have their own specifics, therefore, the protection of walls and corners should be diverse. For example, in the corridors you need to protect the walls from bumps with the backs of chairs, and the corners from chips and bumps with mobile couches.

Emergency rooms suffer from the same mobile medical equipment, and operating rooms need protection for the walls, which, in addition to mechanical damage, must also be environmentally friendly, resistant to chemical and antiseptic treatment. At the same time, the coating of all bumpers should not cause allergic reactions in patients. The high resistance of vinyl bumpers to impact allows you to save walls and corners in intensive care units and emergency departments.

On the staircases, handrails are additionally installed, which, in addition to protecting the walls from damage, also help patients to move around, sticking while moving.

Vinyl corner bumpers serve as the functional and most effective solution for protecting all corners in medical institutions.

The arrangement of underground parking lots in large and small medical centers is accompanied by the use of special rubber bumpers with reflective elements for parking lots.

All protective systems are very easy to install. The installation of the bump is carried out using the most common tools.The height of the installation depends on the point of the greatest probability of collision with the back of a chair, the headboard of a stationary bed, a couch or mobile equipment.

After marking on the wall surface with the help of a construction level, it is necessary to drill holes in the wall with a puncher.
Fix the aluminum profile with dowels at intervals of 50 cm.
Attach the rubber seal to the grooves of the aluminum profile.
Fix the plugs and the vinyl cover.

A large selection of RAL colors also performs an attractive aesthetic function. The color spectrum will fit well into any room design. The palette is presented in 32 colors.