How to cover the concrete floor in the garage so that there is no dust

Concrete as a material for pouring floors has a lot of advantages. These include inexpensive price, ease of filling, strength, durability, as well as fire safety and environmental friendliness. It is for this reason that concrete floors are widely used in the construction of garages, workshops, warehouses and hangars. However, with all its advantages, the material still has disadvantages, and one of the most important is the formation of dust on the screed during operation. Today we will talk about why the concrete floor in the garage or other room starts to get dusty and how to solve this problem. 

Why did the floor start to get dusty The appearance of dust is possible not only on the old floor, but also on the new screed, which was put into operation quite recently.

The reason for this may be: 

• Insufficient density: if the concrete has not been properly compacted or mixed, small pores and air pockets remain in it, which lead to the formation of dust.
• High humidity: If the concrete has been laid in conditions of high humidity, this may lead to the formation of dust as a result of drying. This reason is typical for basements and cellars in the garage, as well as rooms with inadequate waterproofing. 
• Weak reinforcement: poor quality of reinforcement leads to rapid destruction of the structure, as well as the formation of dust.
• The impact of aggressive factors: oils, gasoline, other aggressive substances and mechanical effects lead to the formation of dust and destruction of the concrete floor in the garage. 
• Concrete composition: If the materials used in the concrete production process have not been correctly selected or used in the wrong proportions, this can lead to the formation of dust.

These are some of the main reasons why concrete on the garage floor can get dusty. In general, in order to avoid the formation of dust, it is necessary to choose the right composition of the mixture, ensure proper filling, and also protect the floor from oils, gasoline, solvent and other aggressive substances that are often used in rooms of this type. In order to reduce the occurrence of dust, it is advisable to use special materials, which we will talk about in more detail. 

What materials should be used for dedusting the garage Quartz topping for concrete is a special layer that is applied to the surface of concrete to improve its appearance and functionality.

• Topping is a mixture of quartz sand and special polymer additives. After applying the topping to concrete, a smooth and durable surface with high resistance to abrasion and chemical influences appears.
• Corrosion inhibitors, such as Tekno AD cement mix, are often used when pouring new concrete floors in garages and other similar premises. Concrete corrosion inhibitors prevent the appearance of rust on the surface of metal reinforcement, which contributes to prolonging the service life of concrete structures. 
• The silicate-based concrete hardener is suitable for application on new and old screed, which allows you to solve the problem of dusting the old concrete floor in the garage. It consists of silicate compounds that interact with the mineral components of concrete, forming new, stronger bonds. The use of a silicate-based concrete hardener can significantly increase the strength of concrete and resistance to various factors, such as mechanical stress, abrasive loads, chemical aggressive media, etc. It can also increase the wear resistance of concrete and improve its aesthetic properties.
   

In general, in order to prevent dusting of concrete, it is necessary to choose the right materials, use special additives and sealing components, and regularly maintain and clean concrete surfaces.