Teknoser 100 quartz topping, concrete hardener, 25 kg TEKNO

384

uah / bag

Teknoser 100 is a hardener for fresh concrete surfaces, which includes sorted quartz sand, hydraulic binder and special chemical additives. Increases the strength properties of the concrete surface by 1.5 times, gives the necessary decorative appearance of the surface.

Where it is used:

For industrial floors with light and medium intensity of operation.
For stores and department stores.
Underground passages of metro stations, covered parking lots.
Production workshops, warehouses, factories.
Shopping centers with heavy traffic of people, industrial buildings, gas stations, hangars for airplanes.

Features and Benefits:

Eliminates the formation of dust from coated surfaces.
Excellent resistance to mechanical shocks.
Excellent resistance to coating wear.
Creates a durable, smooth and non-slip frost-resistant surface.
Increases the impermeability of concrete, increases resistance to penetration of oils, lubricants, etc.

Instructions for use:

Before using TEKNOSER 100, the appropriate concrete hardness must be achieved, otherwise cracks may appear in the concrete. It is applied in a "dry-on-wet" way. To achieve optimal results, the application of the TEKNOSER 100 dry concrete hardener should be carried out in two stages at the rate of 2-4 kg/m² in one stage. After absorbing all the moisture from the concrete with a hardener, the concrete surface is treated with mechanical grout machines. After the initial grout, the hardener is applied again manually at the rate of 2-4 kg/m² and the surface is treated in the same way. A hard and smooth surface is formed after processing with blades (knives) for finishing grout.

Warnings for use:

To get the highest quality coating, it is necessary to calculate the optimal time for application.
It should be avoided in windy, extremely cold and rainy weather.
The application of the surface hardener should not be carried out in very windy or arid conditions.
Surface hardeners can change color depending on the type of concrete surface.
To ensure uniformity and continuity of color, the process of laying the floor should be as protected as possible from environmental influences.
Do not add fly ash to the concrete mixture, as it accumulates in the upper layer of the slab, which leads to dust release of the flooring or peeling of the hardener.
Do not add water to the concrete mix to increase its workability. This reduces the strength of concrete and increases chemical and physical shrinkage, resulting in uncontrolled scratches and cracks.
The product may cause irritation if it gets on the skin. Protective gloves and safety glasses must be worn. In case of contact with eyes, rinse them immediately with plenty of water and seek medical help.

Colour	Available in grey, red, green
Expiration date	12 months in a dry environment in a closed package
Packaging	25 kg bag
Expenditure	4-8 kg/m²
Application temperature	+5 °C...+ 30 °C
Bending resistance	9 N/mm²
Compression resistance	70 N/mm²
Wear resistance (according to the Taber method)	<4 g (H22, 1000 g, 1000 cr.)
Fire resistance	A1