Acrylic varnish Teknocila 300, one-component, 17 l TEKNO

7 500

uah / bucket

Teknocila 300 is an acrylic, highly effective, shockproof, multi-purpose concrete varnish, insulating and protective material.

Where it is used:

To protect concrete surfaces.
For finishing floors and walls as a decorative component.
To extend the service life of concrete structures.
It is used as a surface hardener.

Features and Benefits:

Increases the wear resistance of the surface.
One-component.
Provides concrete with chlorine resistance.
Dries quickly.
By increasing the tightness, it prevents the appearance of cracks as a result of temperature changes.
It is used as a varnish due to the formation of a bright film layer.
Protects concrete from atmospheric influences that can penetrate the concrete

Instructions for use

The surface must be dry, solid and free of all kinds of foreign particles, such as dust, dirt, oil, etc. The best methods of surface preparation are steam cleaning, high-pressure water jet or grinding.

TEKNOCILA 300 is ready to use. Mix well before use. Apply to the surface with a brush or a roller with a short pile manually or with automatic sprayers. Do not use on exposed surfaces during precipitation.

Curing phase: does not require special treatment, protect from precipitation for at least 1 hour at a temperature of approximately 20 ° C (becomes resistant to dust after 30 minutes).

Application Notes/Limitations:

After using this product, the equipment should be cleaned with a TEKNOTHINNER.
In case of contact with the skin, rinse with warm water with detergent.
The product may irritate the skin. Protective gloves and safety glasses should be used. In case of contact with the solution in the eyes, they should be immediately rinsed with warm water and seek medical help.
Flammable material, work should be carried out at a great distance from sources of fire, elevated temperatures, welding and cutting machines and tools.

Colour	Transparent liquid
Packaging	17 l bucket
Expiration date	12 months in the closed original packaging
Ignition temperature	+90°C
Density	0.92 (±0.03) (kg/l)
Viability of the mixture	2 hours
Expenditure	Roller, brush: 0.100 - 0.200 l/m² Spray gun: O,150 - 0.250 l/m²
Application temperature range	+5°C...+35°C
Dry film thickness	135 (±15.00) microns
Complete solidification	5 days
Standards	In accordance with ASTM O 309-81