Product code: 100005687

Topcoat Teknobond 650P TEKNO

670

uah / kg

Teknobond 650P is a protective, two–component finishing paint based on polyurethane, with high resistance to ultraviolet radiation.

Where it is used:

Features and Benefits:

Provides excellent adhesion to epoxy and polyurethane surfaces, concrete, asphalt, metal.
It is applied in any way, whether by spraying, using a brush or roller.
It has high resistance to ultraviolet radiation and temperature difference.
Resistant to abrasion, shock and chemical compounds.
It is applied to horizontal and vertical surfaces.

Instructions for use:

The surface must be dry and free of all types of dust, dirt, cement mortar residues and lubricating oil using appropriate methods to ensure maximum adhesive strength.
The surface must be strong, have sufficient compression resistance (at least 25 N/mm2) and tensile strength (at least 1.5 N/mm2).
After adding component B to component A, mix for 2-3 minutes using a low-speed electric mixer (maximum 400 rpm) until a homogeneous mixture is obtained.

Application Notes/Limitations:

Low temperFor the highest quality curing of the material, do not use boundary temperature conditions.atures slow down the curing process, while high temperatures speed up the curing process. The viability will also vary depending on the temperature.
After application, the application surface must be protected from direct sunlight, strong wind and high air temperature (above 35 °C).
The product may irritate the skin. Protective glasses or gloves should be used. If the mixture gets on the skin, it should be washed with water and detergent. In case of contact with eyes, rinse with plenty of warm water and seek medical help.
Immediately after application, the equipment should be cleaned with Tekno solvent. Hardened equipment can only be cleaned mechanically.

Chemical composition	Polyurethane mixture based on acrylic, with solvent
Colour	According to the RAL palette
Density of the mixture	1.38±0.02 (g/ml) EN ISO2811-1)
Expiration date	12 months in the closed original packaging
Packaging	20 kg set
Drying time	For pedestrians 3 days, full cure 7 days.
Expenditure	O,150-0,250 kg/m2
Life time of the mixture	45 min ( +20 °C)
Application temperature	+5 °C...+30 °C
Diluent	TEKNOBOND 650 P Polyurethane Paint thinner