Primer Teknolatex 200 for concrete surfaces, 12 kg TEKNO

1 106

uah / bucket

Teknolatex 200 is a primer based on acrylic dispersion for concrete surfaces for plaster and gypsum.

Where it is used:

For internal use on vertical and horizontal surfaces
For priming walls and ceilings
To increase the adhesion of plaster mixes based on gypsum, lime and cement to the concrete surface

Properties of the primer:

Instructions for use:

Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
To prepare the working solution, pour 6 liters of clean water into a clean container and pour out the dry powder (12 kg) Teknolatex 200. Using a low-speed mixer (400-600 rpm), mix the mixture until smooth.
The primer can be applied to the surface with a brush, roller or mechanical spray.

Notes:

Suitable for internal use only.
Do not add foreign materials to the mixture.
Immediately after applying waterproofing, it is necessary to protect the surface from adverse weather conditions (direct sunlight, high temperatures < 35 C, precipitation and frost).
The tools and equipment used should be washed immediately after use.
The product may cause irritation if it gets on the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. Before starting work, you can apply a protective cream on your hands.

Colour	Transparent
Expiration date	12 months in a dry environment in a closed package
Packaging	Bucket 17 kg
Ignition temperature	+ 90 °C
Density of the mixture	0.92 0.03 kg / l
Application temperature	+ 5 °C - + 35 °C
Expenditure	Brush or roller: 0.100 - 0.200 l/m2
Expenditure	Spray: 0.150 - 0.250 l/m2
Layer thickness	135 ( 0.05) microns
Full drying time	5 days
Meets the standards	ASTM C 309-81