Product code: 100005682

Concrete hardener Tekno Ayrac (10kg) TEKNO

3 432

uah / bag

Tekno Ayrac is a special dye-hardener for stamped concrete, gives surfaces an artistic appearance, and also acts as a disconnector reagent for printing plates.

Where it is used:

Internal and external coatings.
Sidewalks, blind spots, stairs.
Shopping malls, exhibition areas.
It is used with the use of printing plates in concrete systems.

Features and Benefits:

Prevents the printing plates of concrete systems from sticking to concrete.
Provides a rich surface color.
Increases the resistance of the surface to the effects of atmospheric factors.
The complex helps to create a coating resistant to ultraviolet, acids, alkalis.
Gives the surface an artistic look.

Instructions for use:

After applying Teknoser Baski, the Tekno Ayrac powder material is completely scattered over the surface of the monolithic coating. Evenly rubbed with special ironers with the necessary effort, rubbed into the surface of the coating until the base acquires a dense uniform color. The edges of the concrete platform are treated with corner trowels. After applying Tekno Ayrac and before laying the molds for stamping the pattern, a technical break of one hour. After 1-2 days, the surface is cleaned with water under pressure.

Application Notes/Limitations:

It should be avoided in windy, very cold and hot weather.
May cause skin irritation. Protective gloves or goggles should be used. In case of contact with the solution in the eyes, immediately rinse the eyes with warm water and consult a doctor.