Acrylic mastic Teknomer 300 EX, 20 kg TEKNO

4 200

uah / bucket

One-component waterproofing material with increased elasticity based on Teknomer 300 EX acrylic resin.

Scope of application:

for all types of surfaces (concrete, plaster, aerated concrete, brick, galvanized metal, PVC)
for OSB boards and drywall
for external waterproofing of walls of silos and warehouses
open balconies and terraces
kitchens, bathrooms and shower rooms, dining rooms and laundries, bathrooms
to create a moisture-proof layer for slab materials
to create a moisture-proof layer before laying coatings made of wood, plastic and other materials

Advantages:

it has high flexibility at low temperatures
it has a high resistance to cracking
has good adhesion to many materials
prevents carbonation in concrete
easy to apply
the finished surface can be painted or finished with tile materials

Instructions for use

The surface for application must be cleaned of any kind of oil, rust, detergents and other substances that prevent setting. If there are areas in the form of cracks, cavities on the surface - they should be repaired beforehand with the help of convenient cement mixtures Teknorep 300 and Teknorep 300 EX. Corners and joints on the application surface must be sealed with Teknomer Pah Band 120/70 elastic insulating tape.

Application Notes / Restrictions:

Finishing with tiles, ceramics or other materials should be carried out no earlier than 3 days after applying Teknomer 300.
Do not use the material under adverse weather conditions (high humidity, air temperature above 35°C).
Do not use the material on a surface that has a risk of freezing within 24 hours after application.
Before use, it is necessary to mix the contents of the container.
Apply to a moistened surface with a brush, roller.
Depending on the absorbency of the surface, Teknomer 300EX can be diluted with water up to 50% to obtain a primer solution. If desired, a fiberglass mesh can be used as reinforcement between the layers. The waiting time between layers is at least 5 hours.
Each subsequent layer is applied perpendicular to the previous one.
After application, the surface must be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above +35 °C), rain and frost.
The equipment should be rinsed with water immediately after application.

Colour	White
Packaging	20 kg bucket
Expiration date	12 months in a dry environment in a closed package
Time before laying tiles	> 3 days
Time between application of layers	5 hours
Full drying time	7 days
Operational readiness	14 days
Expenditure	1.5 kg/m2 (with a layer thickness of 1 mm)
Water resistance	5 Bar (positive)
Adhesion strength	1 N/mm²
Heat resistance	-25°C...+80°C
Penetration into cracks	≥ 2.5 mm
Elasticity	500-700%