Liquid nails, polyurethane glue Tekno PU, universal, 280 ml TEKNO

258

uah / PCS.

One-component polyurethane adhesive Tekno PU - liquid nails, fast action with high adhesion for gluing most building materials together (concrete, metal, wood, marble, ceramics, expanded polystyrene).

Where it is used:

Bonding of many building materials such as concrete, metal, wood, marble, ceramics and expanded polystyrene
When gluing window sills, door sills, stairs, sides, skirting boards, panels, board paneling and prefabricated elements
For indoor and outdoor work
When gluing porous and non-porous materials
For horizontal and vertical surfaces

Features and Benefits:

It has high adhesion strength
It has low fluidity
Can be applied to wet surfaces
Quickly grasps
Easy to apply
Water Resistant
Odorless, solvent-free

Instructions for use:

Surface preparation:

The surface must be cleaned of all kinds of substances that prevent adhesion, dust, dirt and oil, as well as weak parts.

Application:

Cut off the tip of the cartridge above the screw, screw the nozzle and cut off its tip in accordance with the required seam width. Use a gun to apply glue to the surface in strips or dots. Press the surfaces that need to be glued to each other tightly and fix them in this position until completely dry. One of the bonding surfaces must be porous, since the curing of the glue occurs due to the evaporation of moisture from it.

Notes/restrictions on use:

Store at a temperature not higher than +35°C and not lower than -10°C.

Do not use for bonding nylon, ABS, PTFE, polyethylene, polypropylene surfaces.

Colour	Light brown
Packaging	280 ml plastic cartridge
Type	Thixotropic
Density	1.15 g/ml
Curing	15-20 min
Complete drying	24 hours
Storage temperature	+35 °C...+10 °C
Consumption (for a seam of 5 mm)	280 ml per 10-12 m