Sealant one-component acrylic window Profflex A for external use, white, 600 ml Tenax

156

uah / PCS.

PROFFLEX A is a one–component acrylate sealant with high vapor permeability. The sealant is designed to perform the outer layer of the mounting seam in accordance with DSTU-N B V.2.6-146:2010, with an allowable deformation of the mounting seam of no more than 15%, for sealing the outer contour of window, door and balcony structures

Advantages:

High vapor permeability
Very good adhesion to most building materials
Provides water vapor diffusion from inside to outside and protects from rain
Protects against UV and wind exposure
Ready to use
Resistance to deformation
Durability
Possibility of application at negative temperature
Possible surface coloring
due to its high thixotropy, the sealant can be applied to horizontal and vertical, inclined surfaces
Appearance – paste

PROFFLEX A is a one–component acrylate sealant with high vapor permeability. The sealant is designed to perform the outer layer of the mounting seam in accordance with DSTU-N B V.2.6-146:2010 with an allowable deformation of the mounting seam of no more than 15% for sealing the outer contour of window, door and balcony structures.High-quality acrylic sealant PROFFLEX A has high vapor-permeable properties, and is designed for sealing slopes on windows, doors, and balcony blocks, from the outside,

Color - White
Type - Single-Component
Water Resistance - Moisture Resistant
Density - 1608 kg/m3
Consumption - 120 g/m.p.
Volume - 600 ml.
The country of origin of the product is Latvia
Warranty - 12 months

Scope of application:

Sealing of plastic, aluminum and wooden frames
Sealing of door frames and window openings

Consistency - Thixotropic paste
The base is Polyacrylate
Solidification - Evaporation of water
Vapor permeability resistance, (m2·h·Pa)/mg, - no more than 0,23
The formation time of the surface film, g. -1 hour (at 23 ° C and normal humidity)
Curing time at a layer thickness of 3 mm. - 48 hours (at 23 ° C and normal humidity)*
Density, not less than kg/m - 31608 kg/m3
The recommended application temperature range is from 5 °C to 35 °, (the minimum ambient temperature during application is up to -20 °C and relative humidity is not more than 90%). The minimum temperature of the product for application is -13 °C
Operating temperature range - From – 400C to 800C
Adhesive strength, MPa, not less:
- PVC - 0.22
- tree - 0.43
- metal - 0.24
- concrete - 0.65
Water resistance at a pressure of 600 Pa, hours, - at least 24 hours
Yield strength, mm by 2 mm thickness, - no more than 0
The limit of adhesion strength, MPa, is not less than 1.0
Resistance to deformation, %, - not less than 15
Elongation at the moment of rupture % - not less than 364%
Color - white
Stability during freezing/defrosting - 10 cycles
The projected service life of conditional years is at least 20
* With a decrease in temperature or an increase in humidity, the time increases