Acrylic adhesive Teknobond 250 for linoleum and PVC tiles, 20 kg TEKNO

4 752

uah / bucket

Acrylic water-based adhesive with high adhesion strength for linoleum, PVC and LVT coatings.

Where it is used:

Hospitals, laboratories, residential buildings, shopping malls.
For fast and durable high-strength bonding:
LVT and other coatings in rolls and tiles, including homogeneous and heterogeneous PVC
Vinyl, linoleum, and rubber (rubber) coatings
Carpet tiles and carpet.
Needle-punched coatings
Natural linoleum
Textile coatings on synthetic and natural substrates (for example, latex, PVC, polyurethane, jute)
Quartz-vinyl and cork tiles.
On absorbent and non-absorbent surfaces indoors
It is used for gluing carpets, covering PVC materials on concrete and screed

Features and Benefits:

Simply applied
Wide range of application and high strength
Does not contain solvents
Quickly grasps
High adhesive capacity
Suitable for underfloor heating
Resistant to mechanical loads

Instructions for use:

Surface quality: The application surface must be cleaned of materials that prevent adhesion, such as dust, oil, resin and detergent. Weak particles should be dismantled and the surface cleaned with compressed air.

Surface preparation: If there are irregularities on the floor, they must be eliminated with a self-leveling screed TEKNOSELF or TEKNOSELF 500. After leveling, if necessary, the surface should be primed with TEKNOLATEX 200.

TEKNOBOND 250 is applied to the surface with a notched trowel. The flow rate is adjusted according to the depth of the teeth of the spatula. After applying the adhesive composition, it is necessary to wait 2-3 minutes for full adhesion to the application surface to occur and an adhesive film to form. After that, you can proceed directly to gluing the finish coating.

Colour	White
Packaging	Bucket 20 kg
Storage conditions	12 months in a dry environment in a closed original packaging
pH	6,5 - 7,5
Expenditure	250 - 300 g/m²
Life time of the mixture	45-50 min
Initial setting time	15-20 min
Time of commissioning	~ 24 hours
Complete drying	3 - 4 days
Density	~ 1.35 kg/l
Application temperature range	+10°C...+35°C