Polyurethane-bitumen sealant Teknopoliderz 2K, two-component, black, 10 kg TEKNO

4 896

uah / set

Teknopoliderz 2K is a two-component self-leveling elastomeric polyurethane bitumen modified joint sealant that provides waterproofing between concrete elements. This cold-applied sealant is resistant to jet fuel, conventional fuel and engine oil.

Where it is used:

For work on runways and parking lots at airports
For connecting seams on the surface of ground warehouses for storing fuel and engine oil
For asphalt and concrete surfaces, surfaces made of natural stone, mosaic and sheet metal with the appropriate primer
For work on military fields
To fill the seams between asphalt and asphalt, asphalt and concrete, concrete and concrete, and the depth of filling the seams should reach half the width, and the minimum depth is 1 cm
For filling joints of bitumen coatings with concrete
To repair cracks on asphalt and concrete roads.
For filling seams in parking lots, underground parking lots and car washes.

Features and Benefits:

Easy to use
Suitable for external and internal use
Elastic
Does not contain solvents
Resistant to UV rays
Resistant to changes in weather conditions
Resistant to various solutions, fuel and jet oil
Polyurethane
Complies with technical standards TS 5926 EN 14188-2, SS-S-00200D and BS 5212

Instructions for use:

Before using Teknopoliderz 2K, the seams should be cleaned of dirt and all substances that prevent setting with compressed air and a sealing harness should be laid.
Before applying the material, the surface (concrete surface, exposed brickwork, asbestos cement, natural and artificial stone, polyester and hard PVC) should be primed with Teknobond110. You can use Teknopoliderz 2K after about 1 hour after priming the seams.
To prepare the working solution, at the beginning, component A should be mixed separately using a low-speed electric mixer (500 - 800 rpm). Next, add the component to and mix the solution until a homogeneous mixture is obtained for at least 3 minutes.
The mixed and ready-to-use material is applied with a sealant gun for 35 minutes.

Application Notes/Limitations:

It is recommended to wear work clothes and protective gloves.
The tools and equipment used must be washed immediately after use.
Do not use the mixture during rain.

Composition	Two-component polyurethane modified with bitumen
Colour	Black
Packaging	10 kg
Type	Thixotropic
Storage in a dry, dark place, subject to the temperature range of 5°C... 35°C, humidity 75%	12 months in a dry environment in a closed package
Density of the mixture	1.30 ± 0.05 kg/l
Application temperature	+5°C...+50°C
Life time of the mixture	35 - 45 min.
Shore Hardness (A)	20- 35
Full strength set	12 h (with a seam depth of 1 mm)
Elongation at break	400 - 600%
Maximum allowable joint deformation	25%
Solid volume	100%
Elasticity	98%
For seams	from 10 mm
Thermal stability	-30°C... +80°C